1.
Internal combustion engines--Main and connecting rod bearings--Specification
GB/T1151-1993内燃机主轴瓦及连杆轴瓦技术条件
2.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
3.
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。
4.
Research on Vibration Fault Diagnosis for Fire-loss Bush of the Main Bearing in Locomotive Diesel Engine
机车柴油机主轴承烧瓦故障振动诊断的研究
5.
Repair of ZchSnSb11-6-0 axle bush on lifting electrical machinery
主扇风机电机巴氏合金轴瓦的焊接修复
6.
boring machine for connecting rod and cylinder block bush
连杆瓦及缸体轴瓦镗床
7.
Remove the lower insert from the bearing cap.
从轴承盖上拆去下轴瓦。
8.
This paper gives analysis and preventive measures to mechanism of cracks, which appear after main bearing melt of crank shaft on nodular cast iron of6300 C diesel engine.
对6300C型柴油机球铁曲轴在主轴承烧瓦后产生裂纹的机理进行分析，并提出解决措施。
9.
The alloy is suitable for making wear resistant parts such as bush, axle sleeve and worm wheel etc. undor the conditions of high and middle load at the middle and low speed.
合金主要用于制作高、中载,中低速不同工况条件下工作的轴瓦、轴套、蜗轮等耐磨件。
10.
Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。
11.
BUSHINGS SEATED IN BOOTS
坐落在防尘套中的轴瓦
12.
Bushings Installed In Boots
安装在防尘套中的轴瓦
13.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
14.
The rod-bearing cap attaches the connecting rod to the crankpin.
连杆轴瓦盖将连杆安装到曲轴销上。
15.
The Study on Running-in and Wear Properties of Crankshaft-bearing Shell of Diesel Engine
柴油机曲轴-轴瓦磨合磨损性能研究
16.
The results showed that the segregation of Pb atoms in the interface between the alloy and the steel back was the main factor leading to the failure of the bearing bush.
结果表明 ,铅原子在合金层与钢背材料结合面上的聚集是导致轴瓦失效的主要原因。
17.
full journal bearing
全围式轴承（轴瓦在3600范围内包围着轴颈的滑动轴承）
18.
How to use a simulant eccentric bush to resolve an eccentric bore of bearing support
如何使用模拟偏心轴瓦解决瓦座孔偏心问题