1.
Study on the Bearing Mechanism and Optimization Design of the Embedded Large-diameter Cylinder Structure;
插入式大直径薄壁圆筒结构承载机理研究与优化设计
2.
Research on the Bearing Mechanism and Spring Element Numerical Simulation of the Bed Seated Large-diameter Cylinder Structure;
基床式大直径薄壁圆筒结构受力机理与弹簧元数值模拟
3.
Transient-dynamic-FEM Analysis of the Course of Vibration-driving the Thin-wall Large-diameter Cylinder Structure;
大直径薄壁圆筒结构振动下沉过程瞬态动力有限元分析
4.
Optical Fiber Bragg Grating Pressure Sensor Based on Thin-Walled Cylinder Structure with Temperature Compensation
带温度补偿基于薄壁圆筒结构的光纤光栅压力传感器
5.
The formula for calculating the additional soil mass and other parameters are deduced according to the characteristics of the large diameter cylinder breakwater.
根据大直径薄壁圆筒结构防波堤系统的特点，提出了其附加土质量和其它参数计算公式。
6.
The research on the load bearing capacity of wedged-ring joint structure of thin-wall cylinder
薄壁圆筒楔环连接结构承载能力研究
7.
STRUCTURAL DESIGN OF AN ELEVATED CONSTANT-PRESSURE TANK SUPPORTED BY A THIN-WALLED STEEL CYLINDER
薄壁筒体承重钢结构高位稳压水箱结构设计
8.
Research on the Design of Large Steel Cylinder Quay Structure;
插入式钢质大圆筒岸壁结构的设计研究
9.
Research on the Three-dimensional Computing Method of Earth Pressure for Large-diameter Cylinder;
大直径薄壳圆筒结构筒后土压力的空间计算方法
10.
Analysis of Circumferentially Arc Welded Thin-Walled Cylinders to Investigate the Residual Stress Fields
圆弧焊接薄壁圆筒残余应力场的分析研究
11.
Based on the analyses of the structural feature and the requirements of functions of the composite bottle cover of the new kind,two fundamental components,the lining washer and the outer body,are abstracted into a plate and a cylinder with thin wall,respectively.
基于新型组合瓶盖的结构特点和功能分析,将该组合体基本件衬垫和外体抽象为薄板和薄壁圆筒.
12.
Unified incremental solution of thin cylinder under step deformation path
薄壁圆筒在阶形变形路径下的统一增量解
13.
The Study of Spinning Precision Control for Thin Wall Cylinder with Large Length-diameter Ratio
大长径比薄壁圆筒旋压精度控制工艺研究
14.
Test Research on Static Strength of Steel Thin Wall Short Cylinder at Internal Pressure
钢制薄壁内压短圆筒静强度的试验研究
15.
Effect of Choker Clearance on Roundness of Thinwall Cylinder of Super Invar Steel
闷头间隙对超因瓦钢薄壁筒件圆度的影响
16.
INVESTIGATION INTO THE STABILITY OF LARGE SCALE THIN-WALLED STEEL CYLINDRICAL SHELLS UNDER SEVERE DISASTER OF ICE AND SNOW
强冰雪灾害下大型薄壁圆柱钢壳结构稳定性研究
17.
FEM analysis of pressing material installment axial compressive loads cylinder of sintering machine
烧结机压料装置中轴压厚壁圆筒有限元分析
18.
Dynamic Analysis Model of Bed Seated Large Diameter Cylinder Breakwaters under Random Wave;
随机波浪作用下座床式大直径薄壁圆筒防波堤动力分析模型