1.
Method for calculating spur gear mesh stiffness
一种求解直齿圆柱齿轮啮合刚度的方法
2.
Calculation of Meshing Stiffness and Research on Tooth-Race Load Distribution for Herringbone Gear
人字齿轮啮合刚度计算与齿面载荷分布研究
3.
A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact
考虑延长啮合时齿轮副啮合刚度模型
4.
Study on Improved Algorithm of the Time-varying Meshing Stiffness of Gear and Stiffness Excitation
齿轮时变啮合刚度改进算法及刚度激励研究
5.
The Research on the Effect of Pitting and Spalling on the Torsional Mesh Stiffness of Gear;
点蚀和剥落对齿轮扭转啮合刚度影响的研究
6.
gears that mesh at an angle.
齿轮以一定角度啮合。
7.
Study on the Meshing Principle of Three-freedom Straight and Inclined Gear;
三自由度直、斜齿齿轮啮合机理的研究
8.
One cog-wheel engages with another.
一齿轮与另一齿轮啮合.
9.
Bifurcation and chaos of the gear system with backlash and time-varying mesh stiffness
含间隙和时变啮合刚度齿轮传动系统的分岔和混沌
10.
The elastic deformation of the transmission shaft and the bearing, the drive of the mesh toughness, error and mesh impact were considered in the model.
模型中考虑了传动轴和轴承的弹性变形以及齿轮的啮合刚度激励、误差激励和啮合冲击激励。
11.
Calculation of Gear Corner Contact Meshing Impact Rate
齿轮线外啮合啮入冲击速度的计算问题
12.
straight spur gear-on-gear pump
圆柱直齿[外啮合]齿轮泵
13.
A small cogwheel that engages or is engaged by a larger cogwheel or a rack.
小齿轮，齿杆啮合大齿轮或被大齿轮或齿条啮合的小齿轮
14.
Influence of bearing stiffness and backlash on bifurcation and chaotic of spiral bevel gear transmission system
支承刚度和啮合间隙变化时弧齿锥齿轮传动系统的分岔与混沌行为
15.
The engagement of gear teeth.
啮合齿轮的互相咬合
16.
internal spur gear
内啮合圆柱齿轮，直齿内齿轮
17.
gear single flank rolling tester
齿轮单面啮合检查仪
18.
Gears that are not meshing properly.
没有很好啮合的齿轮