1.
Brief Discussion on Selection of Stator and Rotor Slot Shapes of 1.5MW Doubly-Feed Wind Generator
浅谈1.5MW双馈风力发电机定、转子槽型的选择
2.
large-sized generator rotor slotting machine
大型电机转子槽铣床
3.
Research on the Calculation of the Skin Effect for Complex Rotor Bar-shape of the Asynchronous Motor
异步电机转子复杂槽型集肤效应计算方法研究
4.
The rotor has recesses in its three faces between the lobes.
转子在其凸角之间的三个面上有凹槽。
5.
The squirrel-cage winding consists of aluminium or copper bars embedded in the rotor slots and shorted at both ends by aluminium or copper ends rings.
鼠笼型绕组由铝或者铜制的金属条嵌入转子的槽内并用铝或者铜制的环在两端短路。
6.
Reducing the Cogging Torque in Permanent Magnet Machines by Introducing Auxiliary Slot in the Top of Stator Teeth
定子齿顶开辅助槽削弱永磁电机齿槽转矩的方法
7.
Upgrading NCS bipolar ionic membrane electrolyzer into bipolar type zero polar distance electrolyzer
采用国内技术由NCS型复极离子膜电解槽改型为复极零极距电解槽
8.
An Investigation on a 1.2-Meter Slotted UV-Cu+-Laser
1.2米槽型紫外铜离子激光器的研究
9.
Running summaries on ZMBCH-2.7 type ion-exchange membrane electrolyzers manufactured by Bluestar(Beijing) Chemical Industry Machinery Co., Ltd.
北化机ZMBCH-2.7型离子膜电解槽运行总结
10.
Summary on service of ML-211 bipolar type ionic membrane electrolyzer
ML-211型复极式离子膜电解槽检修总结
11.
Design of Broaching Tool for Grooves on Rotor and Numerical Simulation of Metal Cutting Process;
转子槽形拉刀的设计及金属切削过程仿真
12.
Study on On-Line Tool Condition Monitoring in Rotor Slot Milling;
转子轮槽铣削加工刀具状态在线监控研究
13.
Rotor Slot Design of Variable Frequency and Adjustable Speed Induction Motor for Reducing Harmonics Copper Loss
降低谐波铜耗的变频调速异步电机转子槽设计
14.
Elasto-plastic Analysis of the Rotor and Wedges of 1000MW Supercritical Turbogenerator
超临界1000MW汽轮发电机转子和槽楔的弹塑性分析
15.
A furrow or groove, as in a column.
沟槽如柱子上的槽或沟槽
16.
Study on acoustic detection of stator slot wedges in large generators
大型发电机定子槽楔松动的声检测研究
17.
Operation effects of two kinds of high current density ion exchange membrane electrolyzer
两种不同类型高电密离子膜电解槽的运行效果
18.
The conductors placed in the slots of the stator or rotor are interconnected to form windings.
放置在定子或者转子的槽中的导体相互连接，形成了绕组。