1.
(Numerical) Simulation of Shear Strain Localization Processes along Circular Tunnels with Different Diameters
不同尺寸的圆形隧洞剪切应变局部化过程模拟
2.
Strain Gradient Effects on Adiabatic Shear Deformation Localization of Particle Reinforcing Metal Matrix Composites;
颗粒增强金属基复合材料绝热剪切变形局部化中应变梯度效应
3.
New Method for Calculating Local Shear Strain in Adiabatic Shear Band of Titanium Alloy
钛合金绝热剪切带的局部剪切应变估算的新方法
4.
Experimental study on the forming of shear bands and the local deformation in deep excavation
深基坑中剪切带的形成及局部化变形试验研究
5.
The effect of length due to shear localization is studied.
研究了由于剪切局部化而引起的试件长度的尺寸效应。
6.
In plane stress condition, no obvious shear band is observed.
在平面应力状态下,未观测到明显的局部化剪切带图案。
7.
Analyses of the Constant Shear Strain Point and Velocity Distribution in the Shear Band for Geomaterials
地质体材料剪切带内部的常剪切应变点及速度分布分析
8.
Dynamic Behavior and Adiabatic Shear Bands in Fine-Grained W-Ni-Fe Alloy under High Strain Rate Compression
高应变率下细晶W-Ni-Fe合金的力学行为与局部绝热剪切带的形成(英文)
9.
strain controlled direct shear apparatus
应变控制式直接剪切仪
10.
uniform strain shearing strengh tester
等应变剪切强度测试仪
11.
Dynamic Properties and Analysis of Adiabatic Shearing Localization of Tungsten Alloy Matrix Material;
钨合金基体材料动态性能及绝热剪切局部化分析
12.
long thickeners
高[切变]糊料(网印中糊料粘度受到刮浆的剪切应力而呈现变化,变化小的称为高切变糊料)
13.
Design and Manufacture for Strong Shear Rheometer and Experimental Study of Shear Flow Cavitation;
强剪切流变仪的研制及剪切空化的实验研究
14.
THE FINITE STRAIN ANALYSIS OF THE STRETCHING GRAVEL AND OOIDE OF DUCTILE NAPPE SHEAR ZONE IN SOUTHERN LIAONING
辽东半岛南部韧性推覆剪切带拉伸砾石、拉伸鲕粒的有限应变分析
15.
Effect of Orientation of Principal Stress on the Undrained Behavior of Saturated Sand under Monotonic Shearing
饱和砂土不排水单调剪切特性试验研究——考虑剪切过程中变化的总主应力方向的影响
16.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
17.
The Double Holes Micro-shear Examines the Material Partial Mechanics Performance Installment Development;
双孔微剪切测量材料局部力学性能装置的研制
18.
Behavior of Adiabatic Shear and Flow Localization of Alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si
Ti-6.5Al-3.5Mo-1.5Zr-0.3Si合金绝热剪切和局部流动行为