1.
Research on the Mechanical Seal CAT Device and the Performance of the GY70 Mechanical Seal;
机械密封CAT装置及GY70机械密封性能的研究
2.
Study on Fluid Hydrodynamic Mechanical Seals with Deep Circular Grooves;
圆弧深槽液体动压机械密封性能研究
3.
Research on Numerical Analysis and Optimization of Mechanical Sealing Performance;
机械密封性能的数值分析及优化研究
4.
Study on Dry-Friction Mechnical Seal in the Condition of Low Speed and High Pressure
高压低速干摩擦机械密封性能的研究
5.
Theoretical and experimental study of fluid dynamic mechanical face seals with deep spiral grooves;
深螺旋槽流体动压机械密封性能理论研究
6.
Design of Experimental Device and Computer Measure Control System for the Mechanical Seals Performance under Multi-conditions
多工况机械密封性能实验装置及测控系统设计
7.
Numerical analysis of laser textured mechanical seals with a porous sector face
多孔扇形分布端面机械密封性能的数值分析
8.
Study on Performance and Structural Optimization in Mechanical Seals with Laser-Textured Micro-pores Face
激光加工多孔端面机械密封性能研究及结构优化
9.
Calculation and analysis of performance parameters of mechanical seals with laser-textured multi-hole end
激光加工多孔端面机械密封性能参数的计算与分析
10.
Study on the Dynamic Auxiliary Seal Ring of Pusher Type Mechanical Seal
滑移式机械密封的动态辅助密封圈性能研究
11.
Experimental investigation of control valves for flush ofmechanical seals.
机械密封冲洗用限流阀性能试验研究
12.
Influence of Dimple Diameter on Dynamic Performance of Gas Multi-pored Face Mechanical Seal
气体多孔端面机械密封孔径尺寸对密封动态性能影响研究
13.
Analysis of a Hydrodynamic Face Seal with Circular Grooves onto Its Surface
圆弧槽流体动压型机械密封的性能研究
14.
Experimental Study on Performance of Controllable Stern Shaft Mechanical Seal Under Varying Condition
船舶尾轴可控式机械密封变工况性能试验研究
15.
Fractal Characteristics of End Faces' Topography in Friction Pair of Mechanical Seals
机械密封摩擦副端面形貌的分形特性
16.
Properties Analysis and Structural Optimization for the Welded Metal Bellows in Mechanical Seals;
机械密封焊接金属波纹管波片力学性能分析及结构优化
17.
Numerical Analysis of the Dynamic Lubrication Performance of Laser Textured Mechanical Seal Face;
机械密封表面激光造型动压润滑性能的数值分析
18.
"Mechanical seals that employ sprayed or laminated seal faces shall neither be considered equal, nor shall they be acceptable."
采用喷涂密封面或层压密封面的机械密封既与上述密封完全不同,也不能被接受。