1.
Properties of 45 carbon steel hardened by micro-plasma

微弧等离子45钢表面淬火硬化层性能分析
2.
Determination of effective depth of hardening after induction or flame hardening of steel

GB/T5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定
3.
Performance Study of Rehardened MC3 Deep Hardening Layer Cold Work Roll;

MC3深淬硬层二次淬火冷轧工作辊使用性能研究
4.
Finite Element Simulation of the Transient Temperature Field During Laser Surface Quenching and Forecasted Depth of the Hardness Layer;
激光表面淬火瞬态温度场的有限元模拟及硬化层深预测
5.
Hardening means making harder .

淬火就是促使变硬。
6.
surface hardening steel

低淬透性钢, 浅淬硬钢, 表面硬化钢
7.
Effect of Pretreatment on Microstructure and Microhardness of 30CrMnSi Treatment Layer by Laser Quenching
预处理对30CrMnSi激光淬火处理层微观组织和硬度的影响
8.
The sedan camshafts re-melting and chilling process and production technique of shell mold camshaft castings to he re-melted and chilled were introduced.
介绍重熔淬火硬化处理凸轮轴工艺,以及供重熔淬火用的壳型凸轮轴的生产工艺。
9.
Can we control the hardness of the steel when it is harden?

我们能够在钢淬火时控制它的硬度吗?
10.
Influence of overlapping amount on hardness of 9Cr2 steel by laser hardening

搭接量对激光淬火9Cr2钢硬度的影响
11.
Effect of Quenching Treatment on Microstructure and Hardness of (Ti,V)C Steel Bonded Carbide
淬火对(Ti,V)C钢结硬质合金组织及硬度的影响
12.
Effect of Tempering Process on Hardness of 27SiMn Steel in Zero Time Holding Quenching

零保温淬火条件下回火对27SiMn钢硬度的影响
13.
Study on High Speed Cutting Hardened Steel with the Coated Insert (CN35);

硬质合金涂层刀具(CN35)高速车削淬硬钢的研究
14.
So we found that hardening operation is make up of heating and quench.

因此我们发现淬火工序包括加热和淬硬两个步骤。
15.
Study on Corrosion Resistance of 35CrMoA Steel in Laser Quenching/Nitrided Layer

35CrMoA激光淬火/渗氮层耐蚀性研究
16.
Effect of Quenching Process Parameters on Microstructure and Hardness of 65Mn Steel

淬火工艺参数对65Mn钢组织及硬度的影响
17.
Online ENDT for hardness of iron and steel parts based on online LS-SVM

基于Online LS-SVM的钢铁件淬火硬度在线检测
18.
Analysis on Structural Performance of 4CrMo Cold Rolling Worke Roll;

4CrMo超深淬硬层冷轧工作辊组织性能分析