1.
The affect of machining error on the mesh inside of small tooth number difference of the tooth outline overlap interference is studied in this paper, with the application of practical examples, and the corresponding solving methods are given.
应用具体实例,研究了加工误差对少齿差内啮合齿廓重迭干涉的影响,并提出相应的解决方法。
2.
Research on Laser-interference Profilometer with Large Range for Surface Measurement;
激光干涉式大量程表面轮廓仪的研制
3.
Research of Micro-surface Profilometry Based on Phase-stepping Interferometer;
基于相移干涉法的微表面轮廓仪的研究
4.
Contact Surface Profilometer Based on Scanning White Light Interference Method;
基于扫描白光干涉法的接触式轮廓测量仪
5.
Study on Klingelnberg Bevel Gear Interference with the Cutter and Machining Calculating;
螺旋锥齿轮切齿计算及干涉情况的研究
6.
The research of denticle cylinder gear of avoiding the interference root taking place for slice
避免圆柱齿轮干涉及根切的最小齿数研究
7.
Swing Movable Tooth Drive Mechanism with Double External(Double Internal) Tooth Profile
双外齿廓(双内齿廓)摆动活齿传动机构
8.
Study of Rebuilding Invisible Boundaries Between Adjoining Teeth from CT Images Based on Spline Curves
基于样条曲线重构CT牙列图像齿间丢失轮廓线
9.
Auto Redrawing of Invisible Contours between Adjoining Teeth Based on CT Images
对在CT中不可见相邻齿廓线自动重构的研究
10.
On the Three Dimension Distributing with White Light Interferometer;
用低相干光干涉测绘物体表面三维轮廓的立体分布
11.
Basic tooth profile of straight and skew bevel gears
GB/T12369-1990直齿及斜齿锥齿轮基本齿廓
12.
Study on Iterative Learning Control for Harnessing the Nonrepetitive Disturbance;
迭代学习控制的抗非重复性干扰研究
13.
Research on Tooth Profile Interference Based on Meshing Simulation of Harmonic Drive
基于谐波传动啮合仿真的齿形干涉研究
14.
Research of the Theory on Laser Diode Feedback Interference and Its Application in the Measurement of the Surface Profile;
LD反馈干涉理论及其在表面轮廓测量中的应用研究
15.
Research on the Measurement of 3-D Surface Topography Based on Phase-Stepping Interferometer;
基于相移干涉法的三维表面微观轮廓测量技术的研究
16.
Research and Realization of Offset Interference Processing for Profile-loop;
CAD/CAM中复杂轮廓环等距干涉处理算法的研究与实现
17.
The Surface Shape and Profile Dimension Measurement Method and System Based on White-light Interferometric Technology;
基于白光干涉轮廓尺寸与形貌非接触测量方法和系统
18.
Tool Envelope Profile Detection and Research of Tool Interference Checking in NC Machining
刀具包络廓形检测和数控加工中干涉检验的研究