1.
The Analysis of Overall Stability That Welder-shaped Cross-section Combinations Steel Beam after Web Buckling
焊接工字形截面组合钢梁腹板屈曲后整体稳定性分析
2.
Experimental study on low-cycle fatigue behavior of welded I-section steel bracing members under constant amplitude reversed cyclic axial loading
焊接工字形钢支撑等幅轴向反复循环荷载下低周疲劳性能试验
3.
The Influence of Welding Process on the Quality of Welding Joints for the Rectangle Pipe
焊接工艺对冷弯方矩形管焊接接头质量的影响
4.
FE Analysis of Welded Steel Beam Strengthened by CFRP
CFRP加固焊接工字钢梁的有限元分析
5.
An Improved EBW Technique for Digital Module
某数字组件电子束焊接工艺改进研究
6.
Study on Relationship Between Welding Parameters and Weld Shape in Electron Beam Welding
1Cr18Ni9Ti电子束焊接工艺参数与焊缝形状的关系研究
7.
Forming Process Research on Joint Vertical Welding from Single-face to Double-face of Low-alloy Steel Plate
低合金钢板对接立焊单面焊双面成形工艺研究
8.
Code for construction and acceptance of steel welded cylindrical tanks
圆筒形钢制焊接贮罐施工及验收规范
9.
With horn-type fixtures, the welding should be toward the closed end.
用牛角形的工装,焊接应向在尾部.
10.
Technique Research on welding "H" type longeron;
大型焊接工字梁车架生产线的工艺研究
11.
Study on Numerical Control Welding System and Technology of Quality Evaluation for Irregular Workpieces;
异形工件焊接数控系统及焊接质量评价技术的研究
12.
Influence of Welding Process Parameters on the Joint Formation in Friction Stir Spot Welding of Aluminum;
焊接工艺参数对铝合金摩擦点焊接头成形的影响
13.
Prediction and Control of Welding Deformation of Five-Port Connector Based on FEA;
基于FEA的五通连接器变形预测和焊接工装设计
14.
Comparison on Ultrasonic Testing for T-Shape Welded Joints in the Steel Structures
钢结构T形焊接接头的超声波检测工艺对比
15.
Construction Technology of High Steel-Frame Structure and Analysis of the Welding Deformations;
高层钢框架结构施工工艺与焊接变形分析
16.
The joint formed by welding.
焊接点通过焊接形成的接合点
17.
Manufacture of the Device for Welding with Trailing Rolling and Pressing and Research of Control of Welding Distortion;
随焊旋转挤压装置的研制与其控制焊接变形的工艺研究
18.
Forming Process and Welding Performance of Micro-Alloyed Cast-Iron Electrode and Rod;
微合金化铸铁同质焊条（丝）成形工艺及其焊接性能研究