1.
Research on the Structure and Durability of Lining Joint of Shield Tunnel;
盾构隧道衬砌接头的构造与耐久性的研究
2.
Experimental Study on Mechanical Properties for Segment Joints of Super Tunnel Lining
超大隧道衬砌管片接头力学性能试验研究
3.
Bending stiffness of segment joint is a important parameter in shield tunnel structure design.
接缝抗弯刚度是装配式衬砌结构设计的重要参数,工程中一般是通过接头的荷载试验来确定。
4.
flush joint liner
无接箍平口接头衬管
5.
Optimization of Connection Rebar between Secondary Lining and Cable Duct in Highway Tunnels
公路隧道二次衬砌和电缆沟间连接钢筋的改进
6.
A DISS connection is a gasketed type that consists of the valve outlet, nut, nipple, and gasket.
DISS接头是一种衬垫型接头，由阀门排气口、母、接口和衬垫组成。
7.
Bend the bushing tabs so that they are contacting the leaf spring.
弯曲衬套接头以便接头能与叶片弹簧接触。
8.
refractory lining
耐火衬砌, 耐火炉衬, 耐火(材料)衬里
9.
lining of tunnel and underground works
隧道及地下工程衬砌
10.
The inside of the well was bricked over
井里面全部用砖衬砌。
11.
cast-in-place concrete lining
就地灌注混凝土衬砌
12.
lining segment of prestressed concrete
预应力混凝土衬砌块
13.
precast concrete lined tunnel
预制混凝土衬砌隧道
14.
reinforced concrete lining segment
钢筋混凝土衬砌节段
15.
chemically stabilized earth lining
化学加固的土质衬砌
16.
Effect of lining thickness lack on lining safety for highway tunnel
公路隧道衬砌厚度不足对衬砌安全性影响
17.
The nipple of the gasketed connection is not bullet-shaped as in the bullet-nose connections, but is flat to compress the gasket.
衬垫接头的管接口不是象弹头接头那样的子弹形，而是平的，以便压缩衬垫。
18.
It is imperative that no heat is applied to connection as nipples contain a plastic liner.
如果螺纹接头包含塑料衬垫,则不要在这种螺纹接头上焊接。