1.
Moreover, the strength of rotor, blade, root of blade, rim edge and gear coupling were calculated and checked once again with relevant software.
并用相应的软件对转子、叶片、叶根和轮缘以及齿式联轴器的强度重新进行计算和校核。
2.
ON THE THREE DIMENSIONAL CONTACT STRENGTH OF FINAL ARC FIR TREE BLADE ROOT AND ROTOR
末级圆弧枞树型叶根与轮缘三维接触强度研究
3.
Water wheel is a big wheel with blades around the rim.
水轮车轮子很大，轮缘周围装有叶片。
4.
Investigation on Internal Flow Field and Aeroacoustic of Turbomachinery with Trailing Edge Blowing
带尾缘吹气的叶轮机械内部流动和气动噪声问题的研究
5.
INFLUENCE OF ROOT FILLET ON THE AERODYNAMIC PERFORMANCE OF CENTRIFUGAL IMPELLER
叶根倒角对离心叶轮气动性能的影响
6.
Effects of leading-edge modification on secondary flow in turbine cascades
叶片前缘改型对涡轮叶栅二次流的影响
7.
In the lobed impeller the measuring chambers are the space between the lobes and the meter housing.
叶轮式测量室是叶轮和流量叶壳体间的空间。
8.
has wooden spokes and a metal rim.
带有木制的轮辐和金属的轮缘。
9.
a radial member of a wheel joining the hub to the rim.
车轮上连接轮缘和毂的放射状的东西。
10.
Research of Ultrasonic Inspection Technique of Steam Turbine on Blade Root in Nuclear Power Plant
核电厂汽轮机低压转子叶片叶根超声检测技术
11.
Research on analysis method of fatigue strength in wind blade boot
风轮叶片叶根疲劳强度分析方法的研究
12.
Analysis of Manufacturing Technologies of 600MW Steam Turbine Governing-stage Moving Blade Root
600MW汽轮机调节级动叶片叶根加工工艺分析
13.
Heat Transfer Investigation of Film Cooling on the Leading Edge of Turbine Blade;
涡轮叶片前缘气膜冷却的传热实验研究
14.
Investigation of Trailing Edge Film Cooling by Jets Ejected from a Slot;
涡轮叶片尾缘半劈缝气膜冷却实验研究
15.
Numerical Study of the Augmented Cooling on the Trailing Edge of Turbine Blade;
涡轮叶栅尾缘强化冷却方法的数值研究
16.
Effect of different clapboards structure in turbine blade trailing edge complex passages on flow characteristics
涡轮叶片尾缘复合通道隔板结构对流动的影响
17.
Study of an air-cooled turbine blade profile with depression feature at leading edge
具有前缘凹陷特征的气冷涡轮叶型研究
18.
Check no damage for fan blades and turbine blades.
检查风扇叶片和涡轮叶片无损坏迹象。