1.
Software Algorithms for the Determination of Metal Loss Dimensions and Subsections Generation in the Pipeline Assessment with Volumetric Type Flaw
含体积型缺陷管道的缺陷尺寸确定及子截面划分软件实现算法
2.
An Evaluation Method for Near Inspection Surface Defect Tested by the TOFD Secondary Wave
TOFD检测中采用二次波评定近扫查面缺陷尺寸的方法
3.
Guidelines for photomask defect classification and size definition
GB/T16880-1997光掩模缺陷分类和尺寸定义的准则
4.
Growth Defect and Annealing Modification Analysis of Large-Sized SiC Crystal
大尺寸SiC晶体的生长缺陷及退火改性研究
5.
Research on the Detection of Defect and Size of Tube-type Bottle.
药用管制瓶的缺陷及尺寸检测的算法研究
6.
Research of defects detection on metal axis tip surface and dimension measurement system
轴尖表面缺陷检测及尺寸测量系统研究
7.
Your size has been out of stock.
你要的尺寸暂时缺货。
8.
Defect- One or more flaws whose aggregate size, shape, orientation, location, or properties do not meet specified acceptance criteria one are rejectable.
缺陷—合计的尺寸、状、向、置或性能不满足规定的验收标准的一个或一个以上的伤而被拒收。
9.
The results showed that grain size in diamond film, defect and the film growth mode are different to diamond films appearing different colour.
观察表明:外强颜色不同的金刚石膜,其内部晶粒尺寸、缺陷类型和生长方式也不同。
10.
Soybean protein fiber is of many excellent properties, but poor crinkle-proof and dimension statility.
大豆蛋白纤维具有许多优良的服用性能，但存在抗皱性和尺寸稳定性差的缺陷。
11.
The status and the defects which appeared in the hot forming process of abnormal Knuckles under different sizes of billet have been analyzed hence theoretical support for getting reasonable size of billet.
分析了在不同毛坯尺寸下转向节的成形情况及可能出现的缺陷,为获得合理的毛坯尺寸提供了依据。
12.
full size drawing
原尺寸图，实物尺寸图
13.
foot in the door technique
得寸进尺法得寸进尺法
14.
Research on Multi-scale Edge Detection of Surface Defects on Board Strip
板带钢表面缺陷的多尺度边缘检测研究
15.
Structure defect and improving measure of cursor universal angle ruler
游标万能角度尺的结构缺陷与改进措施
16.
The measurements are 108 by 48 by 3 inches.
尺寸是高108英寸，宽48英寸，厚3英寸。
17.
A size of paper, usually18?3 inches or17阶22 inches.
中号尺寸纸张的尺寸，通常为18223英寸或17222英寸
18.
Trimmed size: The size of a printed piece after trimming. Also referred to as Finished size.
裁切尺寸:印刷品裁边后的尺寸。亦称为完成尺寸。