1.
Experimental Study on Deformation Uniformity in Thickness Direction of 2205 Duplex Stainless Steel during Hot Rolling
2205双相不锈钢热轧厚向变形均匀性的实验研究
2.
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程
3.
Displacement fundamental equations of the thick plates bending and the general solution to simply supported rectangular plates by transvers shearing defomation
考虑横向剪切变形厚板弯曲的位移型方程及简支矩形板的一般解
4.
These greater omentum lesions appeared as characteristics of thickened , shifted and peculiar?echo.
声像图特征 :大网膜趋向于病变部位 ,且发生厚度、形态和回声改变。
5.
Navier Solution for the Elastic Equilibrium Problems of Anisotropic Skew Thin Plate with Variable Thickness in Nonlinear Theories
变厚度各向导性斜形簿板的弹性平衡问题的Navier解
6.
The expriment on drawing metal board was conducted, and affection of the strain ratio of width and thickness and aeolotropism index upon the forming by drawing was analyzed.
通过金属板料的拉伸试验，分析了厚向异性指数和各向异性指数对金属板料拉延变形的影响。
7.
ROMANESQUE_VAULTING_DESC;Romanesque churches sustained massive barrel vaults, requiring the reinforcement of the load-bearing walls in order to parry the lateral outward thrust.
罗马式教堂延续不变的厚重桶形穹顶，需要加强承重墙以躲避向外的侧向推力。
8.
In the analysis, the material properties of the functionally graded Timoshenko beam are assumed to vary continuously through the thickness of the beam, according to a power law distribution of the volume fraction of the constituents.
其中，功能梯度材料梁的材料性质采用了沿厚度方向按照幂函数形式连续变化的形式。
9.
A Study to Calculate Thickened-tooth Span Radius of a Motor Steering Gear;
汽车转向器变厚齿扇齿厚跨距半径计算的研究
10.
Research on the Deformation Rule of Surface Movement Caused by Mining under the Conditions of Thick Alluvium and Hard Solid Rock;
厚松散层厚硬岩层开采地表移动变形规律研究
11.
R radial lens distortion
【光】径向镜头变形
12.
Robust control for a combined shape and gauge multivariable system in hot strip rolling
热连轧板形板厚多变量系统鲁棒控制
13.
DQ Research on the Thickness Change of Rectangular Thin Steel Plate's Curving
变厚度矩形薄板弯曲问题的DQ法研究
14.
SOmniFlect Space Warp
泛方向导向球空间变形
15.
POmniFlect Space Warp
泛方向导向板空间变形
16.
Thickness distribution at the deforming zone of aluminum tube in mechanical expanding
铝管锥形模机械扩径变形区壁厚分布规律
17.
Stress and deformation of filament-wound thick-wall cylinder pressure vessels
纤维缠绕厚壁柱形压力容器的应力和变形
18.
Shape Optimization for Hydrodynamic Journal Bearings Based on General Film Thickness Equation
采用通用膜厚方程的动压径向轴承形状优化