1.
Hinge loading calculation on excavating forces for Doosan DH80-7 excavators
斗山DH80-7挖掘机整机挖掘力下的铰点力计算
2.
Experiment and Study on the Pivoted Pin Strength and the Stress Near the Pivot-Point of Articulation System of Wheel Loader
装载机车架铰接系统铰销强度及铰点附近应力分布的试验研究
3.
Calculation of the Force Acted on Hinged Joints of the Hydraulic Excavator Based on ADAMS
基于ADAMS仿真技术的挖掘机铰点受力分析
4.
Analysis of the Influence of the Gusset Plate to the Mechanical Properties of the Special Braced Frame Structure with Pinned Connections
支撑节点板对铰接支撑框架结构体系力学性能的影响分析
5.
Mechanical Behavior of Spherical Plain Bearing Joint under Uni-directional Load
单向载荷作用下向心关节轴承球铰节点的受力性能
6.
Two-point Floating Pneumatic Clamping Device of Toggle-lever Force-amplifer Based on Fixed Cylinder with Double Piston
基于双活塞固定气缸的铰杆-杠杆增力双点浮动夹紧装置
7.
Freyssinet concrete hinge
预应力混凝土铰接结构
8.
The article describes, by examples, the method of monitoring the stress in hoisting large equipment, and points out the conditions by actual monitor, under which a panel point can be reduced to a hinge.
通过实例论述了大型设备吊装中应力监测的方法,并由实测结果得出桁架点简化为铰的条件。
9.
Oil that squeaky hinge.
给那个吱吱作响的铰链上点油。
10.
a pin or bolt forming the pivot of a hinge.
一个钉或门闩以形成铰链的支点。
11.
Optimization of Hinge Point for Direct-lift Construction;
直顶式举升机构铰支点位置优化设计
12.
Discussion About the Problem of Shearing Point Forward Shiftting During Demolition by Controlled Blasting
控制爆破拆除中转铰点前移问题探讨
13.
Do not overexert when reaming holes or threading, lest breaking off the reamer or the screw tap.
铰孔或攻丝时，不要用力过猛，以免折断铰刀或丝锥。
14.
force balance hinged-pendulum accelerometer
力平衡铰接摆式加速度计
15.
Steel strand for prestressed concrete
GB/T5224-1995预应力混凝土用钢铰线
16.
The Dynamics and Control Design of Planar Four-bar Mechanism;
平面铰链四杆机构的动力和控制设计
17.
Analysis of Motion and Cable Tension for ALT-Tanker System;
铰接塔—油轮系统运动及系泊张力分析
18.
Solution Method for Anti-blast Ability of the Wall Based on Yield Line Theory
利用塑性铰线理论求解墙体抗爆能力