1.
The Study on Process of Improving Strength and Toughness of 40CrNi2S12MoVA Steel;

超高强度钢40CrNi2Si2MoVA强韧化工艺研究
2.
Research and Application of Strengthening and Toughening Process for High-manganese Steel Middle Rail Frog
高锰钢辙叉心轨强韧化工艺的研究与应用
3.
An Important Technology for Energy Saving--Non Quenched and Tempered Steels and Their Strengthening and Toughening
节能降耗的一项重要技术——非调质钢及其强韧化工艺
4.
Heat Treatment Process for Improving the Strength and Toughness of 65 Mn Ring Forged Parts;
65Mn环形锻件的强韧化处理工艺
5.
AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL

高强高韧FV520B马氏体钢的时效工艺优化
6.
Improvement on Compound Process of Surface Hardness and Strength Toughness for 5CrMnMo Hot-forging Die
5CrMnMo热锻模表面硬化及基体强韧化复合工艺改进
7.
Study on the Heat Treatment of Strengthening and Toughening of High-strength Structure Steel for Ship;
高强度船体结构用钢强韧化热处理工艺制度研究
8.
The production of high strength and toughness steel plates used for pipeline by Nb microalloying process was introduced.
阐述了利用铌微合金化技术生产高强韧性管线用钢板的工艺技术。
9.
By way of suitable heat treatment, the tensile fracture morphology changes from brittle intercrystalline fracture to dimple fracture, so the strength and ductility of the alloy is increased.
采用适当的热处理工艺可使合金强韧化 ,拉伸断口由脆性的沿晶断裂变为韧窝状断裂。
10.
Effect of processing parameters on strength and toughness of high-strength steel

工艺参数对高强度钢强度及韧性的影响
11.
The Heat Treatment and Phase Transformation of a High Strength and High Toughness Titanium Alloy;
高强韧钛合金的热处理工艺及相变行为研究
12.
The Study of Thermal-Mechanical Processing Technique of High Strength, High Toughness and Damage Tolerant Titanium Alloy;
高强高韧损伤容限钛合金热机械处理工艺研究
13.
Research on TMCP Process and Low-temperatural Toughness of F40 Higher Strength Hull Structural Steel
F40高强度船板钢的TMCP工艺及低温韧性研究
14.
The Influence of Sintering Craft on the Compressive Strength of Mullite Crystal Toughening Foam Ceramic
烧成工艺对莫来石增韧泡沫陶瓷强度的影响
15.
Study of Micro-alloying and Isothermal Quench of Steel Shots With High Toughness

高韧性钢丸的微合金化及等温淬火工艺研究
16.
Processing, Microstructure and Mechanical Properties of In-Site Toughened and Si-C-N Nano-Powder Reinforced Si_3N_4 Matrix Composites;
自增韧与Si-C-N纳米微粉增强Si_3N_4复合材料工艺、结构与性能研究
17.
Effects of heat treatment on microstructure and properties of high strength-toughness and wear-resistant cast steel
热处理工艺对高强韧耐磨铸钢组织和性能的影响
18.
STUDY ON BLENDING TECHNOLOGY AND STRUCTURAL PROPERTY OF REINFORCING AND TOUGHENING NYLON 6
增强增韧PA6复合材料共混工艺与结构性能的研究