1.
An EFG-FE Coupling Method for Macro-Micro Thermal Elasto-Plastic Contact of Rough Surfaces;
宏观—微观热弹塑性粗糙表面接触问题的EFG-FE耦合方法
2.
Finite Element Analysis of Rough Surface of Layered Media under Sliding Contacts
涂层粗糙表面滑动接触的有限元分析
3.
Measuring Technique of Contact Angle and Contact Angle Hysteresis on Rough Solid Surfaces Ⅱ: Contact Angle Hysteresis on Rough Stainless Steel
接触角测试技术及粗糙表面上接触角的滞后性 Ⅱ:粗糙不锈钢表面接触角的滞后性
4.
The Application of Fractal Theory in Surface Roughness Non-contact Measurement;
分形理论在表面粗糙度非接触测量中的应用
5.
Roughness and contact angles of micro-arc oxidation coating on the surface of titanium
纯钛表面微弧氧化膜的粗糙度与接触角
6.
Least Square Method Fit Solutions for Two Elastic Contact Rough Surfaces
两弹性接触粗糙表面的最小二乘法拟合解
7.
Mesh-free Method for Thermal Elasto-plastic Contact of Rough Surfaces
粗糙表面热弹塑性接触问题的无网格法
8.
At such contacts the scale can slide up the asperity, so that the retched mechanism is not operative.
在这种接触中，鳞片能滑过对方的粗糙表面，所以棘轮机理不起作用。
9.
Finite Element Analysis Based on Elasto-Plastic Contact of 3-D Real Rough Surface
基于三维真实粗糙表面的弹塑性接触有限元分析
10.
A rough surface, as of paper or metal.
粗糙表面粗糙表面，如纸张或金属的
11.
It should be noted that the rough disk (disk NO. 3) was in complete contact for most of the trials.
应该注意，表面粗糙的圆盘（第3号圆盘）在很多次试验中处于完全接触的状态。
12.
The surface roughness of the stainless steel components and corner parts touching the fluid is less than0.5μ m， which comes up to the GMP Standard.
所有与流体接触的不锈钢部件表面及弯角部分的粗糙度均达到0.5μ，符合GMP标准。
13.
Research on Sureface Roughness of Equidistant Profile by Turn-milling
车铣加工等距联接型面表面粗糙度的研究
14.
Having a dull finish.
粗糙的、暗淡的具有粗糙表面的
15.
electro-contact type surface roughness tester
电接触式表面粗度试验仪
16.
Development of USB Interface of the Portable Surface Roughness Tester;
便携式表面粗糙度测量仪USB接口的研制
17.
To make rough and grainy.
使表面粗糙或粒状化
18.
shaggy untrimmed locks.
表面粗糙的未装饰的锁。