1.
The distribution curve of workpiece temperature induced by the shear heat source is obtained.
得出剪切热源引起的工件温度分布曲线。
2.
magnetohydrodynamic shear heating
磁流体动力剪切加热
3.
Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting
高速切削4Cr5MoSiV1钢形成的绝热剪切带
4.
Experimental Study on Adiabatic Shear Behavior in Chip Formation during Orthogonal Cutting
正交切削切屑形成中绝热剪切行为的实验研究
5.
Thermal sprayed metallic coatings-Determination of shear strength
GB/T13222-1991金属热喷涂层剪切强度的测定
6.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
7.
Study of Armour-Piercing Mechanism and Adiabatic Shear Banding Characteristic;
穿甲侵彻机理及绝热剪切带特性研究
8.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
9.
Transformation of Adding Free Roll in Front of Double Cut Shear of Hot Galvanized Line
热镀锌线双切剪前增加自由辊的改造
10.
Localized Adiabatic Shear Deformation of TC4 and DT4 Alloys
TC4和DT4合金的绝热剪切行为
11.
Evolution of Adiabatic Shear Bands in Typical Microstructure of Ti-6Al-4V Alloy
Ti-6Al-4V合金绝热剪切带的演化
12.
Optimization Design of Guide Post of Jinchuan 800mm HSM Shears
金川800mm热连轧剪切机导柱优化设计
13.
Optimisation of the Crop Shear in 1580mm Hot Strip Mill
优化剪切控制在1580mm热轧线的实现
14.
Characteristics of the Adiabatic Shear Bands in Mg-10Gd-2Y-0.5Zr Alloy
Mg-Gd-Y系合金中绝热剪切带的特征
15.
Two Types of Adiabatic Shear Bands in 40CrNi2Mo Steel Targets
高强度钢板中的两种类型绝热剪切带
16.
New Method for Calculating Local Shear Strain in Adiabatic Shear Band of Titanium Alloy
钛合金绝热剪切带的局部剪切应变估算的新方法
17.
The Research of the Typical Metal Materials High-Speed Cutting Mainly Deformed Zone Adiabatic Shear;
典型材料高速切削主变形区绝热剪切的研究
18.
An Experimental Study of the Adiabatic Shear Behavior in Orthogonal Cutting of High Strength Steel
正交切削高强度钢绝热剪切行为的实验研究