1.
This article discusses the influence of microstructure and cracking behavior in laser cladding with different repetition width and different layers.
研究不同搭接宽度和层数对激光熔覆的显微组织及开裂性的影响。
2.
Analysis of Static Strength for Overlap Joint Plates and Others;
搭接焊接头搭板的静强度分析及其它
3.
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响
4.
STRESS AND STIFFNESS ANALYSIS OF BI-ADHESIVE BONDED SINGLE-LAP JOINTS
混元胶接单搭接头的应力与刚度分析
5.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
6.
Influence of overlapping amount on hardness of 9Cr2 steel by laser hardening
搭接量对激光淬火9Cr2钢硬度的影响
7.
Temperature and Thermal Stress Distribution in Single Lap Joint
单搭接接头温度场与热应力分布的研究
8.
Effect of Rejoin Length on Tensile Strength of GFRP Composites
搭接长度对玻璃钢复合材料拉伸强度的影响
9.
Ensure that the width/height ratio is locked (chain is linked).
确保宽度/高度比锁(链条连接).
10.
Vision system of butt joint gap width measurement for laser welding
激光焊接对接接头间隙宽度视觉测量系统
11.
Experimental Investigation on Shear Strength of Composite Single-lap Joints
复合材料单搭接头的剪切强度对比实验研究
12.
Width, site, color and inlet or outlet connector of process pipeline.
工艺管线的宽度、置、色及进出接头。
13.
laid overlapping (not flush).
搭接铺设的（不是平接的）。
14.
Marked by breadth or tolerance of views; broad-minded.
宽容的以视野的开阔或接受程度为特点的；宽容大量的
15.
The kind of free ride that some people were getting in past years simply doesn't exist anymore.
这种在过去可以让人们轻易接受的搭便车态度，如今已无立足之地。
16.
By means of multi layer and multi pass lap surfacing, the surfacing layer with big thickness and area can be acquired.
采用多层焊和多道搭接工艺可获得大厚度、大面积堆焊层。
17.
Research on the In-Plan Effective Length Factor of Brace in SHS Truss with Overlap Joints;
采用搭接节点的方管桁架支杆平面内计算长度系数研究
18.
Abrupt Changes of the Lateral Stiffness and Shear Forces in Tube Structure with Transfer Storey and Experiment on Transfer Bracket;
带转换层筒体结构刚度和内力突变及“搭接柱”转换层的试验研究