1.
Investigation into Low Insertion-Loss & High Isolation SOI RF Switch
低插入损耗高隔离度SOI射频开关电路的研究
2.
They have high reflection losses and isolates degree, lower insertion loss.
具有高的反射损耗和隔离度，较低的插入损耗。
3.
insertion loss versus frequency characteristic
插入损耗－频率特性曲线
4.
Method of insertion loss measurement for radio frequency filters.
射频滤波器插入损耗的测量方法。
5.
Analysis of the Test Method of Insertion Loss for Lighting Equipment Used in Medical Applications
医用照明设备插入损耗试验方法分析
6.
Optical fiber mechanical--type splice insertion loss test
GB/T14137-1993光纤机械式固定接头插入损耗测试方法
7.
The Influence of Grounding on EMI Power Filter's Common-mode Insertion Loss
EMI电源滤波器接地方法对共模插入损耗的影响
8.
Measurement of beam-splitting ratio and insertion loss of Y-waveguide
Y型光波导分束比和插入损耗测量技术研究
9.
Since output equals input minus losses, the engineer must kept the losses to a minimum.
因为输出等于输入减去损耗，工程师必须使损耗降低到最小。
10.
Hol mode low-loss transmission
Ｈｏｌ模低损耗传输
11.
Test items:① Insertion loss;② Disturbance voltages;③ Radiated electromagnetic disturbances;④ Harmonic current( emission).
电磁兼容检验项目：①插入损耗；②骚扰电压；③辐射电磁骚扰；④谐波电流。
12.
Some of these considderationsinclude insertion loss, cross talk, propagation delay, and unterminated stubs.
需要考虑的因素包括插入损耗、串扰、传输延迟和未端接短截线。
13.
With typical parameters, the differential phase shift and the insertion loss are calculated.
在典型参数下,计算了该器件的差相移和插入损耗。
14.
Specialties: Small Dimension, Low Insertion Loss, High Restraint Outside the Band and High Reliability.
特点：可实现的滤波器的体积小，插入损耗小，还外抑制高，可靠性高。
15.
Insertion loss of 2.4 db and isolation ratio of 34.8 db were obtained at 1.15 m wavelength.
在波长为1.15微米时,器件插入损耗为2.4分贝,隔离比为34.8分贝.
16.
TMDS Transition Minimized Differential Signaling
转换极低损耗微分信号
17.
The inserted disk is damaged. Please insert another disk.
插入的磁盘已损坏，请插入另一个磁盘。
18.
Acoustics--Measurement method of insertion loss and echo reduction for the underwater acoustical material sample
GB/T14369-1993声学水声材料样品插入损失和回声降低的测量方法