1.
Application of BP Neural Networks Based on Bayesian Regularization to Aircraft Wing Loads Analysis
贝叶斯正则化BP网络在机翼载荷分析中的应用
2.
Maneuver Load Optimal Distribution Between Canard and Horizontal Tail of Three-surface Aircraft
三翼面飞机前翼和平尾机动载荷优化配置
3.
Fast Approximate Analytical Method of Wing Cross-section Distributed Loading
机翼截面分布载荷及节点分配的快速近似方法
4.
LIMIT STRENGTH OF LIPPED H-SECTION MEMBERS UNDER BOTH COMPRESSION AND BENDING
卷边翼缘工形构件在压弯荷载作用下的稳定承载力设计理论
5.
Analysis of Transverse Load Distribution of Multi-box Girder Bridge and Its Experimental Study;
带翼小箱梁桥荷载横向分布计算分析及其试验研究
6.
THE EFFECTIVE FLANGE WIDTH OF BEAM SUPPORT SECTIONS IN CAST-IN-SITU FLOORS UNDER VERTICAL LOADS
竖向荷载下现浇楼盖中的梁支座截面有效翼缘宽度
7.
Load Measurement of Wing Box Based on Distributed Fiber Bragg Grating Sensors
基于准分布式光纤光栅传感器的机翼盒段载荷监测
8.
Identification of helicopter rotor blade distributed loads by using fiber optic sensor measurement
采用光纤传感测量的直升机旋翼桨叶分布载荷识别
9.
If this load centroid is behind the elastic axis of the wing structure, then a nose-down twist of the main wing surface results.
如果该载荷重心在机翼结构弹性轴之后，则引起主机翼表面前端向下的扭转。
10.
RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING
卷边翼缘工形变截面构件在压弯荷载作用下平面内稳定承载性能研究
11.
Obejective To quantitatively research the deformation distribution of the outside pelvis around the replacedartificial acetabulum joint under static loads.
目的研究三翼臼髋关节假体植入后在静载荷作用下骨盆结合处周围的变形状态。
12.
FINITE ELEMENT ANALYSIS AND EXPERIMENTAL STUDY ON THE BEHAVIOR OF REDUCED BEAM SECTION CONNECTIONS OF STEEL FRAME UNDER CYCLIC LOADING
钢框架梁翼缘削弱型节点循环荷载作用下的有限元分析及试验研究
13.
maximum all-up weight [loaded condition]
最高承载重量〔载荷状态〕
14.
empty-side uniformity load
空载侧线路均布载荷
15.
load-side uniformity load
重载侧线路均布载荷
16.
The quantity that a car can hold.
车量荷载一车装载的量
17.
irregularly distributed load
非匀布荷载;不规则分布荷载;不均匀分布荷载;不平匀分布荷重
18.
The loads for which a building must be designed may be classified into dead loads,vertical live loads,and lateral live loads.
设计建筑物必须考虑的荷载可分为恒载、竖直活荷载和侧向活荷载。