1.
continuous drop prouction
连续液滴喷射式[印花]（喷墨印花的一种方法）
2.
Theoretical Modeling and Numerical Simulation of Uniform Droplet Spray Process;
均匀液滴喷射过程的理论建模与数值模拟
3.
Key parameter measurement system for molten micro-droplet in uniform droplet spay forming
均匀液滴喷射成形中微熔滴关键参数在线检测系统
4.
The study of statistical model of mass liquid drop during metal spray forming process
金属喷射成型过程大量液滴的统计模型研究
5.
Effect of different injection angles on gas-droplets two-phase flow mixing characteristics
喷嘴入射方式对气体-液滴群掺混的影响
6.
scatter in a mass or jet of droplets.
大量地散开或喷射小滴。
7.
drop on demand (DOD)
按需滴液（喷墨印花术语）
8.
Study of Motion and Transfer Heat Process of Droplet and Stress of Billet;
喷射成形液滴运动和传热过程及沉积坯的应力研究
9.
hydraulic gun (liquid-jet-type)
水枪（液体喷射式）
10.
the introduction of a liquid (by pouring or injection) drop by drop.
把液体一滴一滴注进去（例如滴或注射）。
11.
squirt or spray (a liquid) quickly.
快速地喷射或喷溅液体。
12.
The film drops are more numerous and smaller than the jet drops.
膜形成的水滴数量比喷射形成的多，也比喷射形成的水滴
13.
Study on the Gas-liquid Ejector and Bi-ejector Refrigeration System;
气—液喷射器及双喷射式制冷系统研究
14.
Jet drops are launched at several meters per second up to a few centimeters above the surface, where they come in contact with human sense organs.
喷束滴在液面上方是以每秒数公尺到数公分的速度激射开来，与人类的感觉器官接触。
15.
Flexible tubing for drip irrigation emitters or "leaky" pipe.
滴灌喷射装置或“渗漏”管的灵活布管
16.
Theoretical and experimental study on pneumatically actuater diaphragm-driven micro-droplet jetting system
气动膜片式微滴喷射系统原理与实验
17.
Fine drops of a liquid, such as water, perfume, or medication, sprayed into the air.
喷雾细小的液滴，如水，香水或药剂被喷入空气中
18.
Correlations between Dynamic Surface Tension and Droplet Diameter
喷雾液动态表面张力与雾滴粒径关系