1.
Austenite Grain Coarsening during Reheating in a Nb-V-Ti Microalloyed Steel
Nb-V-Ti微合金钢再加热过程中的奥氏体晶粒粗化
2.
Microstructure and Mechanical Properties of Micro-Alloy Steels Alloying with V,Nb,and Ti
含V,Nb,Ti微合金钢的微观结构及力学性能
3.
The Research on the Surface Cracks of Continues Rolled Round Billet for Alloy Steels with a Little V and Ti
含V、Ti微合金钢连轧圆坯表面裂纹的研究
4.
Influence of deformation and N content on the microstructure of medium-carbon V-Ti-N microalloyed steels for oil-well tubes
变形量及N含量对油井管用中碳V-Ti-N微合金钢显微组织的影响
5.
Welding-Induced Brittleness Susceptibility in Mo-V-Ti-N Microalloyed Steel and Metallurgical Methods for Restraint
Mo-V-Ti-N微合金钢的焊接脆化倾向及其抑制方法
6.
Continuous Cooling Transformation Curves and Structure of Nb-V-Ti Microalloying 08MnCr High Strength Steel
Nb-V-Ti微合金化高强度钢08MnCr连续冷却转变曲线和组织
7.
Microstructure and Hydrogen Absorption Property of Zr-Ti-V Alloy
Zr-Ti-V合金的微观组织及吸氢性能
8.
Preparation and Performance of a New(Ti,V)C Steel Bonded Carbide
新型(Ti,V)C钢结硬质合金的制备及性能分析
9.
SINTERING BEHAVIOR AND PHASES ANALYSIS ON(Ti,V)C STEEL BONDED CARBIDE
(Ti,V)C钢结硬质合金的烧结行为及物相分析
10.
Effect of Quenching Treatment on Microstructure and Hardness of (Ti,V)C Steel Bonded Carbide
淬火对(Ti,V)C钢结硬质合金组织及硬度的影响
11.
Effect of vanadium content on the microstructure and mechanical properties of (Ti,V)C35CrMo steel bonded carbide
V含量对(Ti,V)C35CrMo钢结硬质合金组织与力学性能的影响
12.
A Study on the Microstructures and Hydrogen Storage Characteristics of Ti-Cr-V Based Hydrogen Storage Alloys;
Ti-Cr-V系储氢合金的微结构及储氢特性研究
13.
Effect of Cerium Addition on Microstructure of Ti-V-Cr-Fe Hydrogen Storage Alloys
铈对Ti-V-Cr-Fe储氢合金显微组织的影响
14.
An Investigation on the Ti-V-Mn/Ti-Cr-V Hydrogen Storage Alloys and Hybrid Hydrogen Storage Vessel;
Ti-V-Mn/Ti-Cr-V储氢合金及混合储氢容器的研究
15.
PRECIPITATING KINETICS OF V(C,N) IN FERRITE OF V-N MICROALLOYING STEEL
V(C,N)在V-N微合金钢铁素体中的析出动力学
16.
Effect of Heat Treatment on Microstructure and Wear Resistance of(Ti,V)C Steel Bonded Carbide Produced by In-situ Sintering
热处理对原位烧结(Ti,V)C钢结硬质合金组织及耐磨性的影响
17.
Sintering Behavior,Phases and Microstructure of(Ti,V)C Steel Bonded Carbide
(Ti,V)C钢结硬质合金的烧结行为、物相及组织结构
18.
Production Technology of Ti Microalloyed High-Strength Steel by CSP in LY Steel
涟钢CSP Ti微合金化高强度钢的生产工艺研究