1.
Sealing convex platform: sealing convex platform is made of soft rubber, and used to seal each pin.
③ 密封凸台：密封凸台是用软橡胶制成的可密封每一根插针。
2.
Cold Extrusion Process and Die Design of Cups with Bosses
圆形凸台件的冷挤压工艺及模具设计
3.
Malfunction diagnosis analysis of a bracket mounting boss for engines
发动机支架安装凸台的断裂故障诊断分析
4.
Measurement of odd boss raceway diameter of linear motion ball bearing
直线运动球轴承奇数凸台沟道直径的测量
5.
Study on Warm Precision Forging of Spur Gears with Big Modulus and High Boss
大模数高凸台圆柱直齿轮温精密成形技术研究
6.
Analysis on the Radar Scattering for the Boss at the Position of the Metal-Medium Connection of Aircraft Cabin
飞机座舱金属-介质连接处凸台的雷达散射分析
7.
Study on the Influence of Die Structure on Precision Forging of Spur Gear with High Boss;
模具结构对高凸台直齿轮精锻成形影响研究
8.
Study on Thermal Mechanism of Solder Bumps Reflowed by Induction Self Heating;
感应自加热（ISHR）重熔BGA凸台发热机理研究
9.
Research on cold forging of spur gears with high boss based on uniform thinking
基于均衡思想高凸台圆柱直齿轮冷锻成形
10.
Be sure the dummy club of the bar put into the restrict slot followed by tightening the fastening screws of cover plate
一定要将芯棒的凸台装入限位槽内，拧紧盖板紧固螺丝。
11.
The thick part of the piston that holds the piston pin is the pin boss.
用来支撑活塞销的活塞厚的部分称为活塞销凸台。
12.
the self-lock performance and effect of SPR are good when the height of die and boss is higher;
当凹模凸台较高时,自冲铆接的自锁性能和效果较好;
13.
The maximum stress of the framework occurred at the node of undersurface of the main hydraulic cylinder mounting boss.
机架最大应力值发生在主油缸安装凸台下表面的节点上。
14.
The cooling way is the key factor of effect the boss core hot spot.
凸台型芯的散热方式是影响热节形成的关键因数。
15.
This paper deals with warm precision forging of accurate spur gears with big modulus and high boss.
本文所研究的是大模数高凸台圆柱直齿轮的温精密成形技术。
16.
The spur gears with big modulus and high boss are critical parts in the automobile industry.
大模数高凸台圆柱直齿轮是汽车工业上有特殊意义的零件。
17.
Study on the Law of Metal Flow of the Cavum Complex Parts with the Boss Multi-extrusion Load Process
带凸台的复杂空腔零件多向加载过程金属流动规律研究
18.
The balcony juts out over the main street .
阳台凸出在街道上方。