1.
The morphology of crack propagation indicate that there is the toughening mechanism of whisker's pull- out and crack deflection.
裂纹进展形态表明,存在晶须拔出及裂纹偏转增韧机制。
2.
The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
3.
Investigation of Fatigue Crack Deflection for A357 Casting Aluminium Alloy
A357铸造铝合金疲劳裂纹偏折研究
4.
Interaction between offset parallel cracks and combination conditions
平行偏置裂纹相互作用及其合并条件
5.
The Causes of Crankshaft Offset Grinding and Grinding Crack and Their Solutions;
曲轴偏磨与磨削裂纹的成因及解决办法
6.
Method of Strongly Singular Integral Equation for the Torsion of Cylinder with Edge Crack
边裂纹柱扭转的强奇性积分方程解法
7.
Analysis of Fundamental Frequencies of Rotating Shafts with Transverse Crack;
含横向裂纹的转动轴的振动基频分析
8.
Treatment of Cracks on Runner Blade of Turbines In Tianshengqiao Hydropower Station
天生桥一级电站水轮机转轮裂纹处理
9.
Influence of the Harmonic Gear Drive Torsion Stiffness on Crack
裂纹对谐波齿轮传动扭转刚度的影响
10.
Study on Inner Crack Healing of Ultra-super-critical Rotor 12Cr Steel
12Cr超临界转子钢裂纹愈合研究
11.
Detailed siress analysis was carried out for a section of the pipeline including an eccentric reducer on which long cracks appeared twice.
进而对曾两次出现长裂纹的偏心异径管管段进行细部应力分析。
12.
Influence of Solute Segregation on Crack Susceptibility at Solidification Front of Continuous Casting Strand
溶质偏析对连铸坯凝固前沿裂纹敏感性影响的研究
13.
Freliminary Investigation of Microcracks in Laboratory Prepared Columnar Ice during Ductile-Brittle Transition
人造柱状冰韧脆转变区裂纹的初步研究
14.
DIAGNOSIS OF SHAFTING CRACKS IN ROTATING MACHINES BY DUAL EDDY CURRENT TRANSDUCERS
用双涡流传感器诊断旋转机械轴系裂纹
15.
Studies on the Crack Turning Theories for Integrally Stiffened Structures and It s Application;
整体加筋结构裂纹转折理论及其应用研究
16.
Research on the Crack Propagation Forecast and Preliminary Study on Turbine Runner Saftey Assessment;
裂纹发展趋势预估及转轮安全评估基础研究
17.
Basic Research on Acquisition of AE Signal of Cracks in Francis Turbine Runner Blades;
转轮叶片裂纹声发射信号获取的技术基础研究
18.
Steam Turbine Rotor Crack Analysis and Processing of 150 Plant 50MW Unit;
一五零电厂50MW机组汽轮机转子裂纹分析及处理