1.
The joint formed by welding.
焊接点通过焊接形成的接合点
2.
electrode ,metal contact, for welding machines
电焊机金属接点焊条
3.
Study of Flux for Microelectronics Soldering and Microstructure of Solder Joint;
微电子焊接助焊剂及其焊点组织研究
4.
they forget to solder the contacts.
他们忘记了焊接切点。
5.
solder together by using hard solder with a high melting point.
用高熔点的焊料来连接。
6.
Research of locating bonding points automatically in chip bonding
芯片焊接中焊点自动定位技术的研究
7.
A resin material used in soldering electrical connections.
焊接电气连接点时使用的松香之类的助焊剂。
8.
The Numerical Simulation of Welding Deformation of Spot Welding Joint
不锈钢点焊接头焊接变形数值模拟分析
9.
Affect of Welding Current on Quality of Spot Welding Joints of Al-Zn Alloy Coated Steel Sheet
焊接电流对镀铝锌钢板点焊接头质量的影响
10.
For instance, you should make sure that the insulations between the soldering tweezers and welding cable are ok and the earthing point and each termipoint of soldering machine are in good condition.
如焊钳和焊接电缆的绝缘是否有损坏的地方，焊机的外壳接地和焊机的各接线点接触是否良好。
11.
CONTROL UNIT FOR HU A Yu SPOT WELDING AND arc WELDING MACHINE
华宇型点、弧焊通用焊接机器人计算机控制器
12.
Analysis for the Welded Empty Sphere Joint with Incompletely Filled Groove Defect;
含未焊透缺陷网架焊接空心球节点应力分析
13.
The Numerical Simulation of Low Transformation Temperature Electrodes Welding Residual Stress;
低相变点焊条的焊接残余应力数值模拟
14.
Study on Correlation between Resistance Spot Welding Parameters and Weld Quality;
电阻点焊参数与焊接质量的相关性研究
15.
Comparison of joint performance between weld-bonding and resistance spot welding of dual-phase steel
双相钢胶焊与电阻点焊接头性能对比分析
16.
Static Analysis for Weld-Bonded Single-Lap Shear Joint with Multiple Weldspots
多焊点情况下胶焊单搭接头的静力分析
17.
Influence of Phosphorus on Reliability of Interface between Au/Ni/Cu Pad and SnAgCu Solder Joint
P对Au/Ni/Cu焊盘与SnAgCu焊点焊接界面可靠性的影响
18.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4