1.
Numerical Studies on the Crack Closure Effect in Fatigue Crack Propagation;
疲劳裂纹闭合效应数值模拟方法研究
2.
STUDY ON CLOSING LAW OF CRACK IN ROCK MASS UNDER COMPRESSION
压缩作用下岩石裂纹闭合判据的研究
3.
Virtual Crack Closure Method Based on Secondary Development of MSC.Patran
虚拟裂纹闭合法在MSC.Patran中的二次开发
4.
Influence of Ce on Crack Closure Effect and Intrinsic Fatigve CrackGrowth Resistance In Al-Li Alloy
铈对铝锂合金裂纹闭合效应及本征疲劳裂纹扩展抗力的影响
5.
Two-dimensional Stress Intensity Factors by BEM with Crack Closure Integrals
边界元法结合裂纹闭合积分求二维裂纹应力强度因子
6.
Modeling of Fatigue Crack Growth Retardation with Artificial Wedges Using FE Method
聚合物诱导裂纹闭合抗疲劳效应的有限元模拟
7.
NUMERICAL SIMULATION AND SIMPLIFIED CRITERION FOR CLOSURE OF AN OPEN CRACK IN BRITTLE MATERIALS
张开裂纹闭合的数值模拟及简化判据研究
8.
Analysis of strain energy release rate based on virtual crack closure technique
基于虚拟裂纹闭合技术的应变能释放率分析
9.
THE CHARACTERIZATION OF PLASTICITY INDUCED FATIGUE CRACK CLOSURE BASED ON NUMERICAL ANALYSIS
疲劳裂纹塑性闭合特性的数值分析方法
10.
The portions of the crack near the saw cut and along the edges are closed in relation to the center of the crack face.
接近锯切口和沿着边缘的裂纹部分相对于裂纹面中心而肯定是闭合的。
11.
At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.
在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。
12.
FATIGUE CRACK TIP CLOSURE AT NEARTHRESHOLD AND INFLUENCE FACTORS
临近门槛值时疲劳裂纹尖端的闭合及其影响因素
13.
Influence of fatigue crack tip plastic zone on crack propagation behavior in TC4ELI alloy
TC4ELI合金疲劳裂纹尖端塑性区对裂纹扩展的影响
14.
Delayed Crack and Stress Corrosion Crack of High Strength Low Alloy Steel
低合金高强钢的延迟裂纹和应力腐蚀裂纹
15.
Study on SiC-Al_2O_3 Composite Ceramic Preparation and Its Crack-healing Properties;
SiC-Al_2O_3复合陶瓷的制备及裂纹愈合研究
16.
Study on the Preparation and Crack Healing of Al_2O_3/TiC Composite;
Al_2O_3/TiC复合材料的制备及裂纹愈合研究
17.
Study on mechanism of crack healing in Al_2O_3-MgAlON composites
Al_2O_3-MgAlON复合材料裂纹愈合机理研究
18.
Cracking performance and crack closing of retard-bonded prestressed concrete beams
缓粘结预应力混凝土梁抗裂和裂缝闭合性能