1.
Thermal Decomposition Kinetics of Titanium Hydride and Aluminium Alloy Melt Foaming Process;
氢化钛热分解反应动力学与铝合金熔体泡沫化过程研究
2.
Dynamic Study and Analysis of Aluminum and Aluminum Alloy Melt in the Foaming Process;
铝和铝合金熔体泡沫化过程的动力学研究及分析
3.
New Type CFF for Cleaning Molten Aluminum
铝熔体净化用的新型泡沫陶瓷过滤板
4.
Al-Si foam was fabricated by direct melt foaming.
采用熔体发泡法制备泡沫铝硅合金。
5.
Preparation by the Means of MFT and Investigation of the Properties of Aluminum Alloy Foam;
泡沫铝的熔体发泡法制备及其性能研究
6.
Preparation and Analysis on the Defects of Aluminum foams via Melt-foaming method
熔体发泡法制备泡沫铝合金及其缺陷分析
7.
Numerical simulation of production processes of aluminum foams using air injection and melt stir
熔体吹气发泡法制备泡沫铝的准三维数值模拟
8.
Study on the Viscosity Control of Foam Aluminum Melt and the Bubble's Stability
泡沫铝熔体粘度的控制与气泡稳定性研究
9.
Research on Key Technologies for Batch Preparation of Aluminum Foam Slabs by Melt Foaming Process
熔体发泡法批量制备泡沫铝板材关键技术的研究
10.
The Structure and Its Characteristics Analysis of Aluminum Foam Ingot Fabricated by Molten Frothing Process Using SiC Particles Adhered Melt
SiC颗粒自增粘熔体发泡法制备泡沫铝铸锭的组织及其特征分析
11.
You will become foam on the sea.
化作海上的泡沫。”
12.
foam flame bonding
泡沫塑料热熔粘合（利用火焰）
13.
Introduce the application of the optical image technology in the study of formation of microcellular foams to observe the nucleation and growth of bubbles.
提出了在微孔泡沫塑料的成型研究中,利用光学成像技术来观察挤出熔体中的发泡情况的方法。
14.
Experimental Study and Numerical Simulation on Bubble-melt Two-phase Flow with Gas Injection and Mechanical Stirring Relevant to the Aluminum Foam Processing;
吹气搅拌法制备泡沫铝工艺的气泡—金属熔体两相流的实验研究和数值模拟
15.
Numerical Study on Foam Evolution Dynamics in the Foaming Process of Metallic Foams
泡沫金属发泡过程的泡沫演化动力学研究
16.
The Study on Property Evaluation and Injection Improvement for Foam System
泡沫复合体系性能评价及注入方式优化研究
17.
Discussion on the foam system design for the dangerous chemical tank
浅议液体危险化学品仓储罐区泡沫消防设计
18.
Experimental Study of High-performance Foam--a Separate Chemical Agent Carrier for Coal Spontaneous Combustion
防灭火阻化剂的载体——高性能泡沫的实验研究