1.
Simulation and Parameter Analysisi of Hot Compounding Rolling of Stainless Clad Plate;
不锈钢复合板热轧复合仿真及参数分析
2.
Bonding Mechanism and Strength of Al-Pb Alloy Strips and Hot Dip Aluminized Steel Sheets by Hot Rolling
铝铅轴承合金与热浸铝钢板的热轧复合机制与结合强度
3.
LONGITUDINAL BUCKLE OF ASYMMETRIC CLADED STAINLESS STEEL PLATES FOR HOT ROLLING
非对称不锈钢热轧复合板材的纵向弯曲
4.
EFFECT OF Si ON THE INTERFACIAL BONDING STRENGTH OF Al- Pb ALL OY STRIPSAND HOT DIP AL UMINIZED STEEL SHEETSBY HOT ROL LING
硅对铝铅轴承合金带与热浸铝钢板热轧复合界面强度的影响
5.
Influencing Factors and Bonding Mechanism of Hot Rolling Bonded Bimetals
双金属热轧复合的界面结合影响因素及结合机理
6.
Simulation on hot rolling compounding of two metal plates and determination of minimum relative reduction
双金属板热轧复合模拟及最小相对压下量的确定
7.
Study on Compound Modification and Heat Treatment of High-speed Steel Used for Rolls;
轧辊用高速钢复合变质及热处理工艺研究
8.
Simulation of Mutli-Pass Hot Rolling Plate by a Mixed Analytic -Numerical Method;
中厚板多道次热轧过程的复合解析数值法模拟
9.
Roll Compaction and Subsequent Heat Treatment of Fe-Si Composite Powder;
铁、硅复合粉末的轧制成型与后续热处理
10.
Research on FEM Simulation of Q235 and 304 Stainless Clad Sheet in Hot-rolling Process;
Q235/304不锈钢复合板热轧有限元模拟研究
11.
Bond Rolling Principles and Heat Treatment of Cu/Al Clad Sheet
铜铝轧制复合变形规律及热处理的研究
12.
Hot Rolling and Properties of 304/440/304 Stainless Steels Clad Plate for Knife Products
刀具用304/440/304不锈钢复合板的热轧和性能
13.
Heating Effect on Bonding Strength of Ti/Cu Cladding Bar by Pass Rolling
加热温度对型孔轧制法制备钛/铜复合棒结合强度的影响
14.
FEM Simulation of Hot-rolling Process for Multi-layer Stainless Steel/Aluminum (Aluminum Alloy) Plates;
多层不锈钢/铝（合金）复合板热轧工艺有限元数值模拟研究
15.
calender bonded
热轧粘合（非织造布）
16.
thermosol-pad steam range
热溶轧染蒸汽联合机
17.
Large area of spalling accured on the work layer of high-Crcentrifugal cast iron roll after heat treatment.
高铬离心复合铸铁轧辊辊身工作层在热处理后发生大面积剥落。
18.
The Interface Element Method of Temperature Field And Thermal Deformation About Material Composite Casting-Roll And Its Study on Visual Simulation
材料复合型铸轧辊温度场和热变形的界面元方法及其仿真研究