1.
Study of Micro-scale Abrasive Wear Mechanism of Y-TZP Ceramic
热压烧结氧化锆陶瓷的微磨料磨损机制研究
2.
rotary abrasive tester
旋转式磨料磨损试验机
3.
The wear mechanism of stainless steel against copper based sintered alloy is mainly attributed to adhesion,abrasion and oxidation.
不锈钢/铜基烧结合金材料的磨损机制主要是粘着磨损及氧化磨损。
4.
A Study on Impact Abrasive Wear Resistance and Wear Mechanism of Fe-B-C Alloys
Fe-B-C合金冲击磨料磨损性能及磨损机制的研究
5.
A Study on Impact Abrasive Wear Resistance and Wear Mechanism of New-Style Martensitic Steel
新型马氏体钢冲击磨料磨损性能及磨损机制的研究
6.
Development of High Speed Electric-tribometer and Researches on Tribo-electric Behaviors of Strip Materials;
载流摩擦磨损试验机的研制及滑板材料摩擦磨损和载流性能研究
7.
Development of Dynamic Load Wear Testing Machine and Material Wear Experiment Investigation;
振动载荷磨损试验机的研制及材料磨损性能研究
8.
Effects of abrasive types on wear mechanism of high manganese steel ZGMn13
磨料类型对ZGMn13钢磨损机理的影响
9.
Under the condition of boundary lubrication,adhere wear mechanism and abrasive grain wear mechanism do the business at the same time.
在边界润滑条件下,镀层的磨损机制为粘着磨损与磨粒磨损并存.
10.
Preparation and Investigation of Wear Behavior and Anti-wear Mechanism of Resin-type Pantograph Contact Strip Materials
树脂型受电弓滑板材料的制备与磨损特性及抗磨机理研究
11.
Research of hardfacing material of impact wear-resistance with Fe-Mn-Cr-Mo-V alloy system
Fe-Mn-Cr-Mo-V系抗冲击磨料磨损堆焊材料的研制
12.
The grinding block made of carborundum abrasive,is very hard and sharp.
磨光机磨块采用金刚石磨料制成，硬度极高，磨削锋利。
13.
Study Abrasive Tester and Effect of Loads on High Chromium Cast Iron;
磨损试验机的研制及载荷对高铬铸铁磨损研究
14.
Micro-mechanism and Control of Elastic-plastic Contact and Wear for Extrusion Forming Process;
挤压成形弹—塑性接触磨损微观机理及磨损控制
15.
Research on Sand Slurry Abrasion Mechanisms of Dredging Conditions and New Wear-Resistant Materials;
疏浚工况泥沙磨损机理及其耐磨新材料研究
16.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
17.
Analyze of Abrasion Damage in Hydraulic Turbine and a New Type of Wear Resistant Material;
水轮机磨蚀损伤分析与耐磨蚀新材料研究
18.
High-performance frition and wear prototyping based on wear sleady-state
基于磨耗稳定态的高性能摩擦磨损实验机研制