1.
Application of Thermal Drawing Set On-line Failure Diagnosis System
热牵伸机组在线故障诊断系统的应用
2.
CONTROLLING AND MANAGING SYSTEM FOR NON-HEATSENSOR、NON-MEASURING-TRANSDUCER DRAW ROLL;
无温度传感器实现热牵伸辊控制及其上位微机管理系统
3.
Bardenheuer's extension
巴登霍伊厄氏牵伸术
4.
pin drafter
针梳牵伸机, 针梳机
5.
Modern controlled drafting systems use drafts of the order of 30.
新式的牵伸控制系统使用大约30倍牵伸。
6.
The effect of different drawing condition and way on structure of PAN precursor
牵伸条件以及牵伸方式对PAN纤维结构的影响
7.
Process Analysis about the Additional Pressure Bar in the Drafting Zone on the Spinning Frame
细纱机牵伸区附加压力棒牵伸工艺分析
8.
Influence of Back Zone Drafting Multiple on Pressure Bar Drafting in Spinning Front Zone
后区牵伸倍数对细纱前区压力棒牵伸的影响
9.
The application of traction to a fractured or dislocated limb to restore the normal position.
牵引，牵伸（术）为使骨折或脱位的肢体恢复原位而进行的牵伸动作
10.
It pointed out that the drafting of mule should better use combination drafting and select right proportion of different drafting with different material.
文章指出，走锭细纱机牵伸应尽量采用混合牵伸方法，根据原料变化相应调整牵伸分配。
11.
Modern drafting systems in the three-cylinder spinning mill are working with10 to200- fold main drafts.
现代纺纱厂中使用的三罗拉牵伸系统的主牵伸倍数为10～00。
12.
For the measurement of drafting forces of staple the Shirley draftometer or a similar instrument is used.
至于测量短纤维的牵伸力，可以应用雪莱牵伸仪或其它类似仪器。
13.
Effect of pressure bar in back drafting zone of SKF drafting system on spun yarn quality and optimizing drafting ratio
细纱机后区压力棒牵伸的效果及牵伸倍数的优化
14.
Study on the Air Jet Flow in Slot Mechanism of Drawing of Spunbonding and Optimize the Structure;
纺粘狭缝牵伸器拉伸气流流场研究与结构优化
15.
Study on air flow field with wide slot mechanism of positive drawing in spunbond process
纺粘宽狭缝正压牵伸器拉伸气流流场研究
16.
During the drawing an adhesive is applied by rollers.
在牵伸过程中,通过罗拉施加粘合剂。
17.
A roving is made and then drawn to a fine strand.
先制成纤维条子,再将其牵伸成细纱线。
18.
A Discussinon about the Pendulum Arm Length for Spinning Ramie Staple
?麻长纤纺细纱机牵伸摇架长度探讨