1.
Molecular dynamics simulation of the bicrystal copper nanowires under the uniaxial tensile strain
双晶铜纳米线拉伸断裂行为的分子动力学模拟研究
2.
Evolution of Nd-rich Second Phase Particles During Electron Beam Welding and Its Effect on Tensile Fracture Behavior of Nd-Containing Titanium Alloy
含Nd钛合金中富Nd第二相颗粒在电子束焊接过程中的演化及其对拉伸断裂行为的影响
3.
Stress Distribution and Fracture Behavior of Compact Tension Beryllium Specimen
紧凑拉伸Be试样应力和断裂行为研究
4.
TENSILE BEHAVIOR AND FRACTURE CHARACTERISTICS OF STEP-QUENCHED DUAL-PHASE STEEL 20
台阶淬火双相20钢的拉伸行为及断裂特征
5.
A Study on the Tensile Deformation and Fracture Behaviors of As-extruded Magnesium Alloys;
挤压镁合金拉伸变形与断裂行为的研究
6.
Analysis on tensile deformation and fracture behaviors of grain oriented electrical steels at low temperature
取向电工钢的低温拉伸变形和断裂行为
7.
Tensile and Fracture Behaviors of Al-4%Mg-0.3%Ce Alloy by Equal Channel Angular Pressing
等径角挤压Al-4%Mg-0.3%Ce合金的拉伸及断裂行为
8.
Investigation of Effect of Tensile Property and Fracture Behavior of Pure Aluminum during ECAP
ECAP对纯铝拉伸性能和断裂行为影响的研究
9.
Transverse Tensile Properties and Fracture Behaviour of DD6 Single Crystal Superalloy
DD6单晶高温合金横向拉伸性能及其断裂行为
10.
The tesile fracture is mixture of quasicleavage and touph dimple.
拉伸断口为韧窝和准解理混合断裂。
11.
Study on the Tensile Deformation and Fracture Behavior of Spray Deposition 7075Al/SiC_p Composites Sheet at Elevated Temperature;
喷射沉积7075Al/SiC_p复合材料板高温拉伸变形与断裂行为研究
12.
Effect of Temperature on the Dynamic Tensile Behavior and Fracture Mechanism of Mg-10Gd-2Y-0.5Zr Alloy
温度对Mg-10Gd-2Y-0.5Zr合金动态拉伸行为及断裂机理的影响
13.
The fracture of composites assumes toughness dimple.
复合材料的拉伸断口为解理与韧窝混合断裂.
14.
Glass always fails in tension.
玻璃总是在拉伸中断裂。
15.
Model YG026 T Electronic Table Fabric Strength Tester is used for testing the breaking strength and breaking elongation.
用于织物的抗拉伸断裂强力及断裂伸长的测定。
16.
RESEARCH ON TENSION-TORSIONAL FRETTING FATIGUE BEHAVIOR AND FRACTURE MECHANISM OF CL60 STEEL
CL60钢拉扭微动疲劳行为及断裂研究
17.
By way of suitable heat treatment, the tensile fracture morphology changes from brittle intercrystalline fracture to dimple fracture, so the strength and ductility of the alloy is increased.
采用适当的热处理工艺可使合金强韧化 ,拉伸断口由脆性的沿晶断裂变为韧窝状断裂。
18.
To measure tensile strength and breaking elongation of single yarn.
测定单根纱线的抗拉断裂强力断裂伸长。