1.
The switch wire harness must be disconnected before testing switch continuity.
在测试导通性之前必须断开开关线束。
2.
Position switch into license plate lamp housing and connect switch harness connector.
定位开关到牌照灯壳，连接开关线束接头。
3.
transmitter-blocker cell
发送天线开关,天线收发转换开关
4.
Feeder Circuit Breaker See Distribution Circuit Breaker.
馈电线路开关见“配电线路开关”。
5.
passive microwave duplexer tube
无源微波天线开关管
6.
PIN microwave high-speed switching antenna
PIN微波高速开关天线
7.
HORN SWITCH FEED WIRE CAPTURED
固定的喇叭开关供电线
8.
Connect wire to pressure differential switch.
连线至差速压力开关。
9.
radiosonde commutator
无线电探空仪转换开关
10.
PIN diode duplexer
PIN极管天线收发开关
11.
Branch duplexer
分支式天线收发开关
12.
Balanced duplexer
平衡式天线收发开关
13.
automatic line sectionalizer
自动线路分段开关装置
14.
Unplug the wire harness connector from the switch.
从开关拔出线束接头。
15.
Ferrite duplexer
铁氧体天线收发开关
16.
antenna switch unit
收发转换开关天线开关箱
17.
General;Push-button 1;Push-button 2;Pull-switch 1;Pull-switch 2;Turn-switch;Mushroom Head
常规;按键 1;按键 2;拉线开关 1;拉线开关 2;旋转开关;蘑菇头
18.
Study on the Linear and Nonlinear Characteristics of GaAs Photoconductive Switches;
GaAs光导开关的线性及非线性特性研究