1.
Research on Micro-Spray-Hole EDM Machine Tool and the Control System
微细喷油孔电火花加工机床及其控制系统研究
2.
Research on the Control System of Micro Spray-hole EDM Machine Tool
微细喷油孔电火花加工机床控制系统研究
3.
aperture atomizer
喷孔式喷油嘴喷雾器
4.
Study on the Fuel Injection Rate of a Multi-hole Injector Applied to a Direct Injection Gasoline Engine
直喷汽油机多孔喷油器的喷油规律研究
5.
The Study on Water Application Rate Distribution of Punched Micro-Irrigation Tubing;
多孔式PVC微喷灌管喷水特性实验研究
6.
A Study on the Mechanism of Cavitation in Diesel Injector Nozzle
柴油机喷油器喷孔内空化效应机理的研究
7.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
8.
A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle
柴油机喷油嘴喷孔中空泡形成过程的数值模拟
9.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
10.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
11.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
12.
Primary study on hydraulic characteristics of punched thin-soft tape for micro-spraying
喷孔为节点式微喷带的水力特性初步研究
13.
Oil whooshed up when the drill hit the well.
当钻孔机钻井时，石油喷了出来。
14.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
15.
Research of High-Gloss Ink-Jet Pring Paper with SiO_2 as Ink Absorption Media;
硅系微孔型高光喷墨打印相纸的研究
16.
Fabrication of profiled microfiber spinneret based on UV-LIGA technology
基于UV-LIGA技术的微孔异形喷丝头制备
17.
Investigation on Noise Elimination Nozzle with Micro-Perforated Panel in Pulse Detonation Engine
脉冲爆震发动机微穿孔消声喷管研究
18.
Fine drops of oil were sprayed into the space between the plates by an atomizer.
利用喷雾器把细小的油滴喷入极板间的空间内。