1.
Effect of land use change on sandy desertification in Gaotouyao town;
内蒙古达拉特旗高头窑镇土地利用变化及其对土地沙化的影响
2.
Energy-saving Engineering for High-voltage Dust-collecting Wind motor for Cement Kiln
水泥窑窑头冷收尘风机高压电机设备节能改造
3.
Bricks and china are Baked in a kiln
砖头和瓷器在窑内烘干。
4.
Study on Treatment Measures of Slope Adverse Geological Body and Tunnel at the Entrance of the Second Yaotou Tunnel
云南省蒙新高速公路窑头2号隧道进口段斜坡变形病害治理措施研究
5.
Research on Improving Property of MgO-MgO·Al_2O_3 Bricks Adhibited by the Cement Kiln Coating;
提高水泥窑用MgO-MgO·Al_2O_3制品挂窑皮性能的研究
6.
Coat a layer of fine grog on the bottom to avoid the glaze run down and stick on it before kiln packing.
入窑前窑室底部先铺上一层幼耐火沙以备釉药可能在高温时流落在窑砖上做成破坏。
7.
Suitable for the construction of aluminium silicate refractory materials.it can prolong the life of kiln lining by combined application with rotary compound bricks.
适用于硅酸铝系耐火材料的砌筑,与回转可窑窑衬复合砖配套使用,能显著提日高窑衬使用寿命.
8.
Design of High Efficiency Low Energy Consumption Natural Gas Fired End Port Furnace for Multi-line Production
“—窑多线”高效率、低能耗大型烧天然气马蹄焰池窑设计
9.
This material could be the best solution for tertiary air duct elbow lining occasions.
解决了大型回转窑三次风管弯头的材料问题。
10.
high-velocity superheated-steam kiln
高速过热蒸气快速干燥窑
11.
Measures for Improving Dedust Efficiency of Esp of Clinker Kiln
提高熟料窑电收尘器收尘效率的措施
12.
MEASURES AND RESULTS OF ENERGY SAVING FOR A 45m HIGH TEMPERATURE TUNNEL KILN
45米高温隧道窑的节能措施与效果
13.
Hot Corrosion of Superalloy Sprung Parts in a Kiln Crown
铠装窑高温合金挂件热腐蚀失效分析
14.
Discussion on Mixed Combustion of Blast Furnace Gas and Natural Gas in Lime Kiln
石灰窑混烧高炉煤气和天然气的探讨
15.
Development and Study on Oil Water Coke Slurry for High Temperature Tunnel Kiln
高温隧道窑用油水焦浆的开发及研究
16.
Automatic control system of coal powder injection in blast furnace/rotary kiln
高炉/回转窑煤粉喷吹自动控制系统
17.
Design on Φ4.25×40m RFI Kaolin Dikect-flame Rotary Kiln
Φ4.25×40 m RF1型高岭土直焰回转窑的设计
18.
Kiln head seal person who adopts clamshell seal, kiln tail equips with the contact-type sealinstallation of the axial, have guaranteed sealed dependability.
窑头密封采用了壳罩式密封，窑尾装有轴向接触式密封装置，保证了密封的可靠性。