1.
Frictional melting during the rupture of the 1994 Bolivian earthquake
1994年玻利维亚地震破裂过程中的摩擦熔融
2.
Influence of infiltrating Si on friction properties of two dim ension weaving C/C composites
熔融渗硅对二维编制炭/炭复合材料摩擦特性的影响
3.
After heating and friction heating by the rotating screw, the resin turns to a melt and is extruded through a die in the form of a cylindrical tube (parison).
塑料经加热及螺杆转动的摩擦力变为熔融后，从模头挤出，成为圆筒状。
4.
Research on the Laser and Plasma Spray Welding Coatings s Friction Property of Cu-14Al-X;
Cu-14Al-X喷熔层摩擦性能研究
5.
Microstructure and friction and wear properties of NiCrBSi laser cladding
激光熔覆NiCrBSi涂层组织及摩擦磨损性能
6.
Design and Experimental Research of Tools Used in Friction Stir Welding for High Melting Point Materials;
高熔点材料搅拌摩擦焊用焊具设计及试验研究
7.
Friction Wear Research of Compacted Graphite Iron with Biomimetic Enhanced Unit Processed by Laser Cladding;
激光熔敷增强单元体蠕铁摩擦磨损性能研究
8.
The Dry Sliding Friction and Wearing Performance of Laser Cladding 3Cr2W8V Mould Steel;
激光熔覆3Cr2W8V模具钢的干滑动摩擦磨损性能
9.
An Investigation on Characteristics of Fretting Tribology for Fusion Welded Joint Metals of Typical Steels
典型钢材熔化焊接头金属的微动摩擦学性能
10.
Friction and wear properties of laser melt-cladding with high-aluminum bronze powders
高铝铜合金粉末激光熔覆层的摩擦磨损性能
11.
An Analysis of Weak No-arbitrage in a Friction Compicates Market;
复杂摩擦金融市场中的弱无套利分析
12.
Technology and Simulation of the Temperature Field of High-melting Point Alloys Welded by Friction Stir Welding;
高熔点合金搅拌摩擦焊接工艺研究及温度场模拟
13.
Preparation of Low-melting Point Bi, Pb, In, Sn Alloy Nanoparticles and Their Tribological Properties
基于Bi、Pb、In、Sn的低熔点合金纳米微粒的制备及摩擦学性能研究
14.
Wear property and mechanism of laser cladding TiC-Ni composite coating
激光熔覆TiC-Ni复合涂层的摩擦磨损性能和磨损机制研究
15.
Comparison of Microstructure and Properties of FSW and MIG Joint for Aluminum Alloy
铝合金搅拌摩擦焊与熔化极氩弧焊接头组织性能比较
16.
"There are three classes offriction: dry, greasy, and viscous. "
有三种摩擦状态:干摩擦、滑动摩擦和粘性摩擦。
17.
pertaining to or worked or produced by friction.
关于摩擦或摩擦力，由摩擦或摩擦力产生。
18.
To warm by rubbing, as with the hands.
摩擦生热摩擦以生热，尤指用手摩擦