1.
Development of the Computor Aided Process Plane System on the Globe Valves at High Temperature
高温球阀计算机辅助工艺设计系统的研制
2.
MGQF-CAPP for the Computer Aided Process Plan of Hi temperature globe valve based on VB;
基于VB的高温球阀计算机辅助工艺系统(MGQF—CAPP)的开发
3.
Abrasive resistance of sprayed Al_2O_3-TiO_2 and WC-Co coatings on high temperature ball valve
高温球阀喷涂Al_2O_3-TiO_2和WC-Co涂层的耐磨粒磨损性能
4.
Has a higher application temperature than Teflon? seated flanged ball valves.
比特氟隆阀座法兰球阀还高的应用温度。
5.
"Mainly used in gate, globe, and check valves for applications up 850H, and in one-, two-, and three-piece ball valves."
主要使用在温度高达850℉的闸阀、截止阀和止回阀,以及整体、对分式和三件装的球阀上。
6.
The metal hard seal fixed on the ball valve divides into the normal temperature and the high temperature, when the application temperature is higher than180℃, please indicate the application temperature the first.
金属硬密封固定球阀分为常温型和高温型，当使用温度大于180℃，订货时应注明使用温度。
7.
Heat installation continues rising, condenser water drops to the temperature of drainage, temperature-sensing component in top material will minify with cold, leave port A, drawoff the condense water quickly.
温度继续升高，阀内温度超过该阀感温元件所排水温度时，顶杆的位移使A口关闭。
8.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
9.
Resists high temperature fluctuations which damage cast steel valves.
抗高温波动，这种波动往往会损坏铸造阀门。
10.
After operating from high temperature, the Shutoff must be manually reset (opened).
在高温操作后，关闭阀必须人工重置(开启)。
11.
Study of a Proportional Flow Rate Control Valve for High Temperature Gaseous Fuel;
比例式高温气态燃料流量调节阀的研究
12.
Fracture Analysis of Stub on Superheater Safety Valve for Power Plant
热电厂高温过热器联箱安全阀接管座开裂分析
13.
Temperatures around the world continue to rise.
全球温度在不断升高。
14.
CFD Simulation in Flow Field of High Water Based Electromagnetic Pilot Valve with the Spherical Surface Seals;
球面密封高水基电磁先导阀流场的CFD模拟
15.
These high temperature zero regulators will provide the same service as the standard BZR for higher ambient or gas temperatures.
这些高温平衡阀会提供适用于环境温度高或燃气温度高，和标准BZR相同的功能。
16.
The effect of rare earth silicon on properties of high temperature abrasion resistant of blast furnace valve surfacing alloy
稀土硅对高炉阀门堆焊合金高温耐磨性能的影响
17.
The heat source must not directly heat the container valve since the valve, connection, and relief device components can be damaged by excessive temperatures.
由于过高的温度会损坏阀门、接头和减压装置组件，热源不能直接加热容器阀门。
18.
Integrally cast body ribs, running parallel and perpendicular to the pipe axis, impart additional strength for high pressure conditions, thermal and pipe loads.
整体铸造阀体翼肋，与管路轴线平行和垂直，增加了阀体强度，适用于高压环境、温和管道负载。