1.
Reasons for Cracks in Cylinder Liner of Engine for Driving Water Pump for Blowing Sand
驱动吹沙水泵柴油机气缸套裂纹损伤原因分析
2.
Crack Reason Analysis and Improvement of Cylinder Liner Supporting Shoulder
气缸套支承肩产生裂纹的原因分析及防止措施
3.
Reason anylisis and countermeasures of crack in cylinder head for 240D diesel engine
240D型气缸盖裂纹原因分析及改进方案
4.
A Case Analysis and Research on the Cylinder and Piston Crack of Ship s Main Engine;
某轮柴油主机缸套及活塞裂纹分析研究
5.
Reason analysis and prevention measures of cracks of cylinder heads for diesel engines of DF_7 locomotives
东风_7型机车柴油机气缸盖裂纹原因分析及预防措施
6.
"After the Block is cleaned, inspect it for cracks, especially in the cylinder walls, top, water jackets, and main-Bearing webs."
气缸体清洁之后,检查有无裂痕,尤其是气缸壁、顶部、冷却水套和主轴承腹板。
7.
jacket water circulating pump
气缸套冷却水循环泵
8.
"In aluminum Blocks, cast-iron or steel cylinder sleeves (also called Bore liners) are used."
由铝铸造的气缸中,装有铸铁．或钢制的气缸套(或称之为气缸衬套)。
9.
The water in the jar has seeped away through a crack into.
缸里的水通过上面的裂纹都已漏掉了。
10.
Analysis of Cracks Formation on the φ2500 Cast-iron Dryer Cover
φ2500铸铁烘缸端盖裂纹成因分析
11.
Study on Optimized for Welding Process of the Crack in High-pressured Cylinder of Steam Turbine
汽轮机高压缸体裂纹焊补工艺优化研究
12.
The Theoretical Study of Cylinder Liner's Lubrication Model after Laser Honing;
激光珩磨气缸套润滑模型的理论研究
13.
The Study and Development of the CAPP System of the Engine Air-cylinder Jackets;
发动机气缸套CAPP系统的研究与开发
14.
Research on Cavitation Erosion Characteristic for Diesel-engine Cylinder Liner Based on FLUENT
基于FLUENT的柴油机气缸套空蚀特性研究
15.
Numerical Simulation and Analysis of the Temperature Field in Cylinder Liner of 380 Diesel Engine
380柴油机气缸套温度场的计算与分析
16.
Finite Element Analysis of Thermal-Structure Coupled Field of Diesel Engine Cylinder Liner
柴油机气缸套热-结构耦合有限元分析
17.
Analysis and reaction to loose defect of boroniron casting cylinder liner
硼铸铁气缸套疏松的分析及解决措施
18.
Microstructure and Properties of In-situ Mg_2Si Particle Reinforced Al Matrix Gradient Composites Cylinder Liner Fabricated by Centrifugal Casting
Mg_2Si颗粒增强自生铝基复合材料气缸套