1.
Al_2O_3p/Al-Cu matrix composites produced by in-situ reactive near-liquidus casting
采用原位反应近液相线铸造法制备Al_2O_3p/Al-Cu基复合材料
2.
Analysis on Microstructure of AlSi7Cu5 Alloy Obtained by Slope-liquidus Method
AlSi7Cu5合金斜板近液相线铸造组织分析
3.
Effect of Pouring Disturbance on Preparation of Semi-Solid AlSi9Mg Alloy by Near Liquidus Casting
浇注扰动对近液相线铸造半固态AlSi9Mg合金的影响
4.
Study on the microstructure of Al-Mg-Si-Cu alloy semi-continuously cast near liquidus
Al-Mg-Si-Cu合金近液相线半连续铸造组织研究
5.
Effect of In-situ Al_2O_3 Particles on Microstructure of Aluminum Alloy by Near-liquidus Casting
原位Al_2O_3颗粒对近液相线铸造铝合金组织的影响
6.
On the Microstructure and Refining Mechanism of ZL201 Alloy Prepared by Near-Liquidus Casting in Electromagnetic Field
电磁场作用中近液相线铸造ZL201合金的组织及其机理
7.
Microstructure of Near-liquidus Semi-continuously Casting 6061 Aluminum Alloy
工艺条件对6061铝合金近液相线铸造微观组织的影响
8.
Effect of In-situ Al_2O_3 Particles on Reheating Microstructure of Near-liquidus Casting Al-Cu Alloy
原位Al_2O_3颗粒对近液相线铸造Al-Cu合金二次加热组织的影响
9.
7075-TiC Particles Composite Produced by In-situ Reactive Near-liquidus Casting
原位反应近液相线铸造TiC_p/7075铝基复合材料的制备
10.
Study on Simulation of Structures of Semi-solid Metal Slurry Made by Liquidus Casting Using Phase-field Method;
半固态合金液相线铸造组织相场模拟研究
11.
Evolution of the Semi-Solid Microstructures of 7075 Aluminum Alloy Cast by LSC
液相线半连续铸造7075铝合金半固态组织演变
12.
As-cast Microstructures of 356 Aluminum Alloy Cast by LSC
356铝合金液相线半连续铸造组织的研究
13.
Casting and remelted microstructures of ZL201 alloy obtained by liquidus semi-continuous casting
ZL201合金液相线铸造与二次加热的合金组织
14.
Microstructure and Wear Properties of Al_2O_3/Al-Cu Composites by In-situ Reaction Liquids Casting Method
原位反应液相线铸造Al_2O_3/Al-Cu复合材料的组织及摩擦磨损特性研究
15.
Modification Practice of LPG Heating for SCR Continuous Casting-rolling Line
SCR连铸连轧生产线液化气加热改造实践
16.
Study on Numerical Simulation of Gas-Liquid Two-Phase Flow during Mold Filling Process;
铸造充型过程气液两相流动数值模拟的研究
17.
On-line Circulating Pickling of Hydraulic Intermediate Pipe of Caster Engineering
连铸机主液压系统中间配管的在线循环酸洗法
18.
Preparation of a New High Strength and Heat Resistant GW103K Magnesium Alloy Semi-solid Slurry by Near Liquidus Method
高强耐热镁合金GW103K近液相线制浆工艺