1.
straight electrolytic (tin) plate
双面等厚镀层镀锡薄钢板
2.
"The Edge Baffle Rig reduces the noise generated by jet interference and minimizes edge over-coating, particularly for low speed, heavy coatings."
边缘挡板用于降低喷流产生的噪音,并减少边缘镀层增厚,特别用于低速及厚镀层情况。
3.
"To achieve good quality heavier coatings, srip roughness and pot chemistry must be appropriate for the combination of coating weight and line speed."
为取得良好的厚镀层,钢带粗糙度和锌锅内金属成分必须适应于镀层厚度及生产线速度。
4.
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个相同锌镀层厚度)
5.
fluorescence automatic coating thickness gauge
荧光式自动镀层测厚仪
6.
best charcoal tin plate
最优厚锡层镀锡薄钢板
7.
Thick nickel electroplating on the surface of electrolessly deposited nickel–phosphorus–boron alloy on quartz optical fiber
石英光纤表面镍-磷-硼化学镀层上电镀厚镍
8.
multilayered plating thickness X-ray spectrofluorometer
多层镀厚度x射线荧光谱仪
9.
Beta backscattering thickness meter for small area of plating (coating)
GB/T10262-1988小面积镀(涂)层β反散射厚度计
10.
Application of Coating Plate Measuring Thickness System Based on LabWindows/CVI
LabWindows/CVI在涂镀层测厚系统中的应用
11.
Prediction Model of Coating Thickness in Hot-Dip Galvanizing
带钢连续热镀锌层厚度预测模型研究
12.
Effect of Chromium Plating Thickness on Fatigue Property of30CrMnSiA Steel
镀铬层厚度对30CrMnSiA钢疲劳性能的影响
13.
Relative quantifying technique to measure mass of fission plate in a fission chamber
裂变室镀层质量厚度的相对测量技术
14.
Based on this, coating thickness structure of tinplate was put forward and the concept of coating apparent thickness was defined.
在此基础上，建立了镀锡钢板镀层厚度结构模型，定义了镀层的表观厚度。
15.
Determination of Layers' Thickness and Bandwidth of Five-layer Transducer for PM AO Devices
PbMoO_4声光器件换能器五层镀层厚度和带宽的确定
16.
The required thickness of coating is obtained by the action of closed circuit control system above the molten zinc level (air knife).
通过气刀和镀层闭环控制系统对液态锌层厚度的调节使镀层厚度达到设定要求
17.
Study on the New Technology of Hot-Dip Aluminizing of Iron and Steel and Its Surface Coating Control Model;
钢铁表面热浸镀铝新工艺及镀层厚度控制模型研究
18.
Effect of Plating Parameters on Plating Rate and Thickness as well as Surface Morphology of Electroless Tin Coating
化学镀锡工艺参数对沉积速率、镀层厚度及表面形貌的影响