1.
Morphology and Formation Mechanism of Bainite Carbide of High Carbon Chromium-Molybdenum Steel
高碳铬钼钢贝氏体碳化物形貌及形成机理
2.
The Latest Advancement of Carbide Free Bainite/Martensite Duplex Phase Steel
无碳化物贝氏体/马氏体复相钢的新进展
3.
Precipitation Behavior of Sulfide in Low Carbon Bainitic Steel during Billets Cooling
坯料温降过程中低碳贝氏体钢硫化物的析出行为
4.
Refinement of Structures and Improvement of Mechanical Properties for Low-Alloy Bainite Steels;
低碳贝氏体钢组织细化及力学性能的改善
5.
Optimization Reasearch on Strength and Toughness of Low Carbon Mn-series Air Cooling Bainitic Steel
低碳Mn系空冷贝氏体钢的强韧性优化研究
6.
Corrosion behavior and corrosion products of a low carbon bainite steel in three kinds of typical environments
低碳贝氏体钢在三种典型环境中的腐蚀行为和腐蚀产物
7.
Study of Continuous Cooling after Austenite Deformation of Low Carbon Bainitic Steels;
低碳贝氏体型钢变形奥氏体连续冷却研究
8.
Effect of Minor Boron on Undercooled Austenite Transformation in Low Carbon Bainite Steel
微量硼对低碳贝氏体钢过冷奥氏体转变的影响
9.
Strengthening Factors of Microalloyed High Strength Low Carbon Bainitic Steel
微合金高强度低碳贝氏体钢中不同强化方式的作用
10.
Grain refinement mechanism of a 700 MPa ultralow carbon bainite heavy plate steel
700MPa级超低碳高强度贝氏体厚钢板的晶粒细化机制研究
11.
On Nucleation and Growth Kinetics of Bainite Transformation of Low and Medium Carbon Steels;
中低碳钢贝氏体形核长大动力学研究
12.
Study on the Microstructure and Properties of Low Carbon Bainitic Steel Q460E;
Q460E低碳贝氏体钢的组织与性能研究
13.
Production practice of 700 MPa grade low carbon bainitic steel
700MPa级低碳贝氏体钢的生产实践
14.
Study on Ti-bearing low carbon bainitic steel with 900 MPa yield strength
900MPa含Ti低碳贝氏体钢的研究
15.
Analysis of Disqualification of Low Carbon Bainite High-strength Steel in Ultrasonic Inspection
低碳贝氏体高强钢探伤不合原因分析
16.
Continuous cooling transformation of 600 MPa grade low carbon bainite steel produced by CSP process
CSP生产600MPa级低碳贝氏体钢的相变
17.
Initial corrosion of low-carbon bainitic steel under thin liquid film
低碳贝氏体钢在薄液膜下的初期腐蚀
18.
a solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite.
含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。