1.
Design of accumulator of hot-rolled stainless steel annealing and pickling line
热轧不锈钢退火酸洗线中活套的设计
2.
Analysis on Cause of Cracking in 06Cr19Ni10(304) Hot Rolling Stainless Steel Welded Pipe
06Cr19Ni10(304)热轧不锈钢焊管开裂原因分析
3.
Hot rolled stainless steel sheets and plates
GB/T4237-1992不锈钢热轧钢板
4.
Cause Analysis of Corrosion of 0Cr18Ni9 Stainless Steel Hot Rolled Strip
0Cr18Ni9不锈热轧带钢表面锈蚀原因分析
5.
Cold rolled stainless steel and heat resisting steel strips
GB/T4239-1991不锈钢和耐热钢冷轧钢带
6.
Hot rolled stainless steel with equal leg angles
GB/T4227-1984不锈钢热轧等边角钢
7.
Preliminary discussion on the treatment technology of JISCO stainless steel hot rolling turbid circulating water
浅谈酒钢不锈钢热轧浊环水处理工艺
8.
Study on the Characteristic of 304 Stainless Steel Hot Rolling Process
304不锈钢热轧生产工艺特性的研究
9.
Production Controlling Method during Hot-rolling of Super-pure Ferritic Stainless Steel
超纯铁素体不锈钢热轧生产控制方法
10.
Wrapper Roll AJC Control Function of Tangshan Stainless Steel 1580mm Hot Strip Mill
唐山不锈钢1580mm热轧助卷辊AJC控制功能
11.
Analysis and Solution of Cracked Edge of 0Cr13 Hot Rolled Coil
0Cr13不锈钢热轧卷裂边分析及解决
12.
LONGITUDINAL BUCKLE OF ASYMMETRIC CLADED STAINLESS STEEL PLATES FOR HOT ROLLING
非对称不锈钢热轧复合板材的纵向弯曲
13.
The Cause and Preventing Measures for Cracks at the Edge of Stainless Steel Hot Strips
热轧不锈带钢边裂原因分析及防止措施
14.
Research on FEM Simulation of Q235 and 304 Stainless Clad Sheet in Hot-rolling Process;
Q235/304不锈钢复合板热轧有限元模拟研究
15.
Simulation and Parameter Analysisi of Hot Compounding Rolling of Stainless Clad Plate;
不锈钢复合板热轧复合仿真及参数分析
16.
Discussion on Mechanism for Vacuum Hot Rolling Bonding of Titanium Alloy and Stainless Steel;
钛合金与不锈钢真空热轧焊接连接机理探讨
17.
The Study of Physical Metallurgical Models for Type 304 Stainless Steel in Hot Rolling;
304奥氏体不锈钢热轧过程物理冶金模型研究
18.
Microstructure Analysis for Serious Edge Crack of 06Cr13 Hot-rolled Stainless Steel Strip
热轧06Cr13不锈钢带严重边裂金相组织分析