1.
The Research on the Automatic Design Technology of the Metal Allowance in Forging Procedures of Turbine Blade;
汽轮机叶片锻造工艺余量自动加放技术的研究
2.
Study on Excess Sludge Reducing from Alkali-minimization Dyeing Printing Wastewater Biological Treatment;
碱减量印染废水剩余污泥减量化工艺研究
3.
Characterisation of Excess Sludge Reduction in an Anoxic + Oxic-Settling-Anaerobic Activated Sludge Process
A+OSA活性污泥工艺剩余污泥减量特性研究
4.
excessive stock
过大的(加工)余量
5.
Reduction of Excess Sludge Production by Uncoupled Metabolism in Activated Sludge Process;
解偶联代谢对活性污泥工艺中剩余污泥的减量化作用
6.
Studies on Reducing Sludge Yield by Using Auncoupler in the Activated Sludge Process;
活性污泥工艺中投加解偶联剂削减剩余污泥产量的研究
7.
TREATING MUNICIPAL WASTEWATER AND REDUCING EXCESS SLUDGE BY COMBINED PROCESS OF UASB +MBBR
UASB+MBBR组合工艺处理城市污水减量剩余污泥的试验研究
8.
required machining allowance
要求的机械加工余量
9.
Studies on the Processing Technologies of the Frozen French Fries and Its Residues
马铃薯薯条及其余料加工工艺的研究
10.
By using this two step sulfonation procedure the acid sludge creation is much decreased, the quality of RO improved and the total yield of KPS+RO increased to >81%.
这种二次磺化工艺使酸渣生成量大大减少 ,剩余油质量提高 ,总收率超过 81%。
11.
The Annealing Technics and the Ways Using Residual Heat of High-Speed Steel after Forging (Or Rolling);
高速钢锻（轧）后的余热退火工艺及余热利用方法
12.
Studies on Extraction Technology and Functional Effect of Polysaccharide from Phyllanthus Emblica L.;
余甘多糖提取工艺及其功能学的研究
13.
Research the Effective Fractions of Phyllanthus Emblica
余甘子化学成分及总酚提取工艺研究
14.
Development of a Vertical Sinter Cooler and Waste Heat Generating Process
立式烧结冷却机与余热发电工艺研发
15.
Syngas methanation with reaction heat carried by steam recycling generated from waste heat
余热蒸汽循环载热的煤气甲烷化工艺
16.
Ausforging and tempering process of 45 and 40Cr steel crank
45和40Cr钢曲柄锻造余热调质工艺
17.
The Research on the Uncoupled Metabolism Model of Excess Sludge Reduction and OSA (Oxic-settling-anoxic) Process;
剩余污泥减量化的解偶联代谢数学模型和好氧—沉淀—缺氧（OSA）工艺的研究
18.
allowance for machining
机械加工公差机械加工余量