1.
Molecular dynamics simulation of water on quenching of steel
水在钢铁淬火冷却过程中的分子动力学模拟
2.
Online ENDT for hardness of iron and steel parts based on online LS-SVM
基于Online LS-SVM的钢铁件淬火硬度在线检测
3.
Why shall harden steel be annealed ?
淬火钢为什么要退火呢?
4.
special improved patented steel wire
特号铅淬火冷拉钢丝
5.
The Quenching Procedure Test of SA387Gr11CL2
SA387Gr11CL2钢淬火工艺试验
6.
Research on Sub-temperature Quenching Process of 30CrMnSiA Steel
30CrMnSiA钢亚温淬火工艺研究
7.
Steel - Hardenability test by end quenching(Jominy test)??
钢端头淬火的淬透性试验（乔米尼试验）
8.
Subcritical Quenching Technique for 45 Steel May Reduce Quenching Dehiscence Tendency
45钢亚温淬火工艺可减少淬火开裂倾向
9.
Anneal means make harden steel soft and remove brittleness.
退火就是使淬火钢变软并消除其脆性。
10.
An Experimental Exploring on Machining Internal Thread of Hardened Steel by EDM
电火花加工淬火钢螺纹孔的实验探讨
11.
Modified Quenching Coefficient Method of Forecasting Hardenability of Medium and Low Carbon Steel and Its Application
修正淬火系数法预测中低碳钢淬透性及其应用
12.
Determination of effective depth of hardening after induction or flame hardening of steel
GB/T5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定
13.
Tempering softening of overlapping zones during multi-track laser quenching for carbon steel and alloy steel
碳钢及合金钢搭接激光淬火回火软化特征
14.
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火，回火和退火。
15.
The Influence of Quenching Medium on Grinding-ball Properties of High Chromium Cast Iron
淬火介质对高铬铸铁磨球性能的影响
16.
Study on the Bainite Morphology of ADI
等温淬火球铁贝氏体组织形态的研究
17.
Study on the Wear Resistancl of ADI
等温淬火奥—贝球铁抗磨性能的研究
18.
Research on the Dummy Bar of Austempered Ductile Iron;
等温淬火球铁(ADI)引锭杆的研制