1.
The principle of gear pump without mesh-force and gear parametric design
无啮合力齿轮泵原理及其齿轮参数化设计
2.
straight spur gear-on-gear pump
圆柱直齿[外啮合]齿轮泵
3.
quiet internal gear pump
低噪声内啮合齿轮泵
4.
Study about the Optimum Value of External Spur Pump Gear and Its CAD;
外啮合齿轮泵的泵齿轮最佳参数的研究及CAD
5.
Study on the Meshing Theory, Design and Manufacturing of External Cycloidal Type Gear Pump;
外啮合摆线类齿轮泵啮合理论及设计制造研究
6.
Study on the Meshing Characteristics and CAD Technique of Cycloidal Gear Pump;
内啮合齿轮泵啮合特性分析及CAD技术研究
7.
ANSYS Workbench Based on Compound Gear Pump Meshing Gear Finite Element Analysis
基于ANSYS Workbench的复合齿轮泵啮合齿轮有限元分析
8.
Study on the Theory and Simulation of Cycloidal Pump;
内啮合摆线齿轮泵的理论研究与仿真
9.
Design and Experimental Study of Water Hydraulic External Gear Pump;
水压外啮合齿轮泵的设计与试验研究
10.
Meshing Simulation of Synchronization Gear Pump Based on Cosmosmotion
基于Cosmosmotion同步齿轮泵的啮合仿真
11.
Influence of Internal Gear Pump's Floating Plate on Pump's Service Life and Efficiency
内啮合齿轮泵浮动侧板对泵寿命及效率的影响
12.
Study on the Mesh Characteristic of a Cycloidal Gear Pump
一种摆线类齿轮泵转子齿廓的啮合特性研究
13.
Effect of different teeth number on phenomenon of trapping oil in external spur-gear pump
异齿数对外啮合齿轮泵困油现象的影响
14.
One cog-wheel engages with another.
一齿轮与另一齿轮啮合.
15.
Research on Designing System of Internal Meshing Cycloidal Pump on Network;
基于网络的内啮合摆线齿轮泵设计系统研究
16.
The Research on Geometrical Parameter and Flow Pulsation in Internal Gear Pump;
内啮合齿轮泵几何参数及流量脉动的研究
17.
The Most Optimization Gap of the External Gear Pumps and the Research of Vibration and Noise;
外啮合齿轮泵的间隙优化及振动和噪声的研究
18.
Mechanism, Modelling and Experiment Investigation of Trapped Oil in External Gear Pump
外啮合齿轮泵困油机理、模型及试验研究