1.
Study on Improved Algorithm of the Time-varying Meshing Stiffness of Gear and Stiffness Excitation
齿轮时变啮合刚度改进算法及刚度激励研究
2.
Considering the time-variant mesh stiffness, the calculated results demonstrated the change of tooth root bending stress in one engagement period.
计算结果揭示了由于时变啮合刚度的影响齿根弯曲应力在一个啮合周期的变化规律。
3.
Bifurcation and chaos of the gear system with backlash and time-varying mesh stiffness
含间隙和时变啮合刚度齿轮传动系统的分岔和混沌
4.
A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact
考虑延长啮合时齿轮副啮合刚度模型
5.
constant mesh gear box
固定啮合齿轮变速箱
6.
Since there is deviation of gear angle, gear box may be damaged while starting engine.
但由于变速箱内啮合角度的偏差,起步驱动时会造成变速箱损坏。
7.
When none of the sliding gears is in mesh with its countershaft gear, the gears are said to be in“ neutral.
如果没有变速齿轮组与副传动轴上的齿轮啮合，这时，就叫做空挡。
8.
Performance Analysis of Gear Drive with Equivocal Modification Meshing beyond Pitch Point;
等变位节点外啮合齿轮传动性能分析
9.
At the same time, the system vibration also made the paired gears enter into meshing in advance or and seceding of a couple of laggingly.
同时，系统振动还使啮合齿对提前或迟后进入啮合、提前或迟后退出啮合。
10.
The teeth on the gears mesh as they turn round.
转动时齿轮上的齿与齿相啮合。
11.
Take the reduction of transmission error of gear and the fluctuation magnitude of meshing rigidity as the judging criterion and at the same time ensuring the variation of loading to be a smooth transition.
以减小齿轮传动误差和啮合刚度的波动大小为衡量标准，同时确保载荷变化呈平稳过渡。
12.
Influence of bearing stiffness and backlash on bifurcation and chaotic of spiral bevel gear transmission system
支承刚度和啮合间隙变化时弧齿锥齿轮传动系统的分岔与混沌行为
13.
Theoretical Study on Combined Effect of the Teeth Meshing Transmission Gear for Tractor
拖拉机变速齿轮啮合轮齿综合效应理论研究
14.
a shaft with screw thread (the worm) meshes with a toothed wheel (the worm wheel); changes the direction of the axis of rotary motion.
螺纹杆与齿轮相啮合；改变轴旋转运动的方向。
15.
a wheel gear (the pinion) meshes with a toothed rack; converts rotary to reciprocating motion (and vice versa).
啮合在齿轮架上的齿轮；把旋转变成往复运动。
16.
Study on Transient Meshing Performance of the Gear of the Vehicle Gearbox;
汽车变速器齿轮啮合瞬态性能分析研究
17.
The application of the meshing theory of gear to abnormal noise
齿轮啮合原理在解决变速器异常噪音上的应用
18.
Elastic deformation static analysis method of globidal cam during the tooth transmission
弧面凸轮啮合过程中的弹性变形静力学分析