1.
multiplexer terminal unit
多路转接器端接设备
2.
Terminal, 3-phase group. Subselect terminal to set text. Right-click to move terminal numbers.
三相成组的端接设备。再选择端接设备来设置文本。右击移动端接设备编号。
3.
Terminal, 3-phase group. Open shape group to move terminal numbers.
三相成组的端接设备。打开形状组来移动端接设备编号。
4.
Terminal. Use control handle to move text.
端接设备。用控制手柄来移动文本。
5.
Choose the port where you connect an alternative input device
选择用于连接其它输入设备的端口
6.
Authorize SS and perform key exchange.
批准用户端设备接入，执行密匙交换。
7.
TCM (Terminal-to-ComputerMultiplexer)
终端设备至计算机多路转接器
8.
The wrong device is attached to the port.
一个错误的设备被连接到该端口。
9.
conditions applying to attachment of terminal or other equipment;
适用于终端连接或其他设备的条件；
10.
A terminal that can transmit and receive traffic.
能发送和接收信息流的一种终端设备。
11.
Receiving device not found. Align the IR ports on both devices and try again.\0
找不到接收设备。请调整两端设备的红外线端口后再试。\0
12.
Receiving device not found. Align the IR ports on both devices and try again.
找不到接收设备。请调整两端设备的红外线端口后再试。
13.
Logic USB equipment was formed with information flow between host controller and equipment by end point marking end point congregate, and it was connected to system equipment.
主机和设备间的通信流经端点标识和端点集合构成逻辑USB设备,与系统设备连接。
14.
Grounding: Each machine should have 1/4-20 earth ground stud on each side (left and right) of the machine.
接地线：每个设备应该在两端(左右)配备1/4-20的接地线。
15.
Select the port to which the infrared device is physically connected.
请选择与该红外线设备物理性连接的端口。
16.
An intelligent device that performs line interfacing functions for a group of terminal at a multi-terminal data station.
一种智能设备，在多终端数据站中完成一组终端的线路接口功能。
17.
Interface between data terminal equipment and automatic calling equipment for data communication
GB/T11015-1989数据通信用数据终端设备和自动呼叫设备之间的接口
18.
The number of telephone lines connecting the subscriber's terminal equipment to the public switched network and which have a dedicated port in the telephone exchange equipment.
连接用户终端设备和公用交换网并具有一个电话交换设备专用端口的电话线数。