1.
The investigation on chip deformation and cutting forces of BTA deep hole drilling
内排屑深孔钻削切屑变形与切削力实验研究
2.
Some Solutions for the Problems of BTA
单管内排屑深孔钻排屑问题若干解决方法
3.
Research on Chip Removal and Cutting Tool Condition Monitoring Technology in BTA Deep Hole Drilling;
BTA深孔钻削排屑与刀具状态监测技术研究
4.
The Reasonable Distribution and Design of Guidance Blocks for Deep-hole Drills by Internal Chip Removal
内排屑深孔钻导向块的合理分布及设计
5.
The CAD and research of drill bit escape of clips for the deep hole processing drill
深孔加工钻头排屑研究及CAD设计
6.
Research on Chip Breakage Condition of Gun-drilling in Low Frequency Vibratory Drilling and Losing of Amplitude
枪钻低频振动钻削深孔断屑条件和振幅损失研究
7.
high efficiency drilling system for small and deep hole
高效小直径深孔钻削系统
8.
Experimental research on the system performance in near-dry deep hole drilling
亚干式深孔钻削系统性能的试验研究
9.
An experimental study of drilling small and deep blind holes with an abrasive water jet
磨料水射流钻削深小盲孔的试验研究
10.
Application of Bored Piles-Soil Nailing+Entry Supporting Complex Technology in the Deep Excavation
钻孔灌注排桩-土钉墙+内支撑复合支护技术在深基坑工程的应用
11.
Research on Chip-breaking Mechanism in the Vibration Drilling and Its Process Equipments;
深孔振动钻削机理及其工艺装备的研究
12.
Applying of Ultrasonic Vibration Drilling on Micro and Small Hole Machining
振动钻削技术在深小微孔加工中的应用
13.
Study on Drilling Tests of PCB Through-Hole Drilling
钻PCB通孔钻切削性能的钻削试验研究
14.
Research on Characteristics of Chip Removal of Modeling and Simulation in Deep Hole Machining
深孔加工DF系统排屑机理研究及建模与仿真
15.
Fluid Field Simulation of Debris Driven During Small Hole Permanent Magnetic Field And EDM Compound Drilling
永磁电火花复合深小孔加工流场排屑模拟
16.
INVESTIGATION OF THE RELATIONSHIP BETWEEN CHIP FORM AND CUTTING CONDITION AS WELL AS MACHINING QUALITY IN DEEP HOLE BORING
深孔镗削中切屑形态与加工条件及加工质量的关系探讨
17.
Effect of Cutting Parameters on Deep Hole Drilling's Quality of High Pressure Heater Tube Plates
切削参数对高压加热器管板深孔钻孔质量的影响
18.
Drilling 50 yards deep,
钻孔至50码深处，