1.
Mechanics in Design of Transmission Roller of Belt Conveyor
带式输送机传动滚筒轴设计中的力学问题
2.
Analysis of Causes of Roll-cut Inefficiency on Driving-drum Spinle Key-slot of DSP160/1000 Type Belt Conveyer
DSP160/1000带式输送机传动滚筒轴键槽滚切失效成因分析
3.
The length of line is prolonged without increasing of driving. Its driving spindle is to drive single roller to form accumulation.
在不增加驱动的前提下能有效的延长线体的长度，其传动轴为驱动单根滚筒，从而形成堆积。
4.
two cylinder opener with axial flow
轴向怜双滚筒开棉机
5.
ball bearing core barrel
滚珠轴承内筒不转的岩心筒
6.
The Research on the Driving Drum for Belt Conveyor Based on Virtual Prototype Technology;
基于虚拟样机技术的带式输送机传动滚筒研究
7.
The Design and Research on Virtual Driving Drum Prototype of Belt Conveyor
带式输送机传动滚筒虚拟样机的设计与研究
8.
Driving Drum Research for Belt Conveyor Based on Pro/Mechanica
基于Pro/Mechanica的矿用带式输送机传动滚筒研究
9.
Rolling bearings--Needle roller bearings-Track rollers--Tolerances
GB/T6445.2-1996滚动轴承滚轮滚针轴承公差
10.
C ompare to conventional live roller types, it is extremely safe. Should there be any object get in between rollers, the slip mechanism will stop the roller from rotate.
与其他传动结构相比较更安全，若有工件卡在滚筒之间，皮带会自行打滑，滚筒停止转动。
11.
nonfilling slot type bearing
无滚珠槽的滚动轴承
12.
motor for kicker and doffer
抖动器和滚筒用电动机
13.
Adopts precision seamless ball and lead screw for movements along X,Y axis.
轴运动采用精密级无间隙滚珠丝杠传动。
14.
Research on Key Technologies of Direct Drive Workpiece Spindle for Gear Hobbing Machine;
零传动滚齿机直接驱动工件主轴关键技术研究
15.
X axis and Y axis adopt ball spiral rods with excellent precisions and low friction factors.
X.Y轴采用滚珠螺杆传动精度佳，摩擦系数小。
16.
Experimental Investigation on Fatigue Life of the Cross Univesal Driveshaft by Improving Crown Drop a Needle Roller
滚针凸度量对提高十字传动轴寿命的试验研究
17.
Some necessary analyses aro also given to the rigid transmission with two drums
对双滚筒刚性传动的应用问题,也作了必要的分析。
18.
Finite element analysis and optimal design of heavy drive pulley of belt conveyor
带式输送机大扭矩传动滚筒的有限元分析及优化设计