1.
CAD of finishing cavity for hammer forging
锤上模锻终锻型槽的计算机辅助设计
2.
Geometrical Analysis For the Surface Contour of the Die Cavity and Forging in Roll Forging Dies
辊锻模型槽与锻件轮廓曲面的几何分析
3.
A Study of Burr Fillister Sizes as well as the Minimum Fillet Radius of a Final Forging Die with the Finite Element Method
毛边槽尺寸与终锻模最小圆角半径的有限元法研究
4.
The technology of precision roll forging by closed die groove of machine driven plough share are researched systematically.
系统研究了机引犁铧闭式型槽精密辊锻技术。
5.
An Analysis of Three Dimentional Deformation of a Round Bar with Oval Cavity and Its Upper Bound Solution
椭圆型槽辊锻圆坯料三维变形的分析及上限解
6.
Effect of the Parameters of New Resistance Wall on Wear Resistance of Crankshaft Finish Forging Die
新型阻力墙结构参数对曲轴终锻模磨损的影响
7.
In this paper,an extrusion-forging process for a knuckle of Benz heavy truck is introduced,which includes four steps: Upsetting,extrusion,pre-forging and forging.
奔驰重型卡车的转向节挤压锻造工艺,分为镦粗、挤压、预锻和终锻4个工步。
8.
She finally arrived on the big stage after years of acting in small plays.
经过几年小型演出中的表演锻炼，她终于成功地站上了大舞台。
9.
Influence of Terminal Forging Temperature and Deformation Ratio on Strength and Toughness of Non-Quenched and Tempered Bainitic Steel
终锻温度和变形量对贝氏体型非调质钢强韧性的影响
10.
The design method of groove system and wide extension coefficient formula proposed in the paper are very significant for roll forging design of other similar products.
本文提出的型槽系设计方法及展宽系数公式,对于类似产品辊锻工艺设计有普遍指导意义。
11.
FE Simulation of Automobile Forward Shaft on Bending Forming and Whole Final Forging Procedure;
汽车前轴锻件弯曲与整体终锻过程有限元模拟
12.
The circular arc wiring duct also called it separates wiring duct /the insulation wiring duct /seal type wiring duct /arc the circular arc wiring duct /walk wiring duct.
圆弧线槽也称之为圆弧型隔线槽/绝缘线槽/密封式线槽/弧线槽/走地线槽。
13.
production-scale cell
生产用电解槽,大型电解槽
14.
Slot-type Design for 10KA Rare Earth Molten Salt Electrolysis Cell;
10KA底部阴极稀土熔盐电解槽槽型设计
15.
Development of Large Single-piece Forgings and Heavy Forging Presses in Aerospace Forging Industry
大型模锻件和模锻液压机与航空锻压技术
16.
The CAPP System Development of Post-forging Heat Treatment Process for Large Forging
大型锻件锻后热处理CAPP系统开发
17.
Forging and Kinetics Coupling Simulation of Manipulator in Heavy Forging
大型锻件操作装备机锻耦合仿真分析
18.
By taking exercise, we can always stay healthy.
通过体育锻炼，我们能够始终保持健康。