说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 活性钢热镀锌
1.
The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing.
热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
2.
Process and Property of Hot Dip Zn-Ni Alloy Coating for Reactive Steel
活性钢热浸锌镍合金镀层工艺与性能
3.
Corrosion-resistant Properties of Hot-dip Galvannealed Steel Sheets
热镀锌合金化钢板的耐腐蚀性能研究
4.
Properties of resistance spot welding joint of DP590GA hot galvanized dual-phase steel
DP590GA热镀锌双相钢电阻点焊接头性能
5.
Effects of Skin Pass on Mechanical Properties of Hot-dip Galvanized IF Steel Sheet
光整对热镀锌IF钢板力学性能的影响
6.
Aplataer process
热镀锌法 -铅锌法热镀锌
7.
Research on Improving the Corrosion Resistance of Passivation Film on Hot-dip Galvanized Steel
提高热镀锌钢板钝化膜耐腐蚀性能研究
8.
The Effect of Annealing Temperature on the Properties and Second-Phase Particles of 0.4 mm Galvanized Ti-IF Steel
退火温度对0.4mm热镀锌Ti-IF钢板组织和性能的影响
9.
Electrochemical Corrosion Behavior of Silane Coatings on Hot-dip Galvanized Steel
热镀锌钢表面硅烷膜的腐蚀电化学性能
10.
Preparation and Corrosion Resistance of Silane Film on Hot-dip Galvanized Steel
热镀锌钢板表面硅烷膜的制备工艺与耐蚀性能
11.
Research on Microstructure and Property of Cold-rolled Hot Dip Galvanized Dual Phase Steel DP780
冷轧热镀锌双相钢DP780的组织与性能实验研究
12.
Effects of Processing Parameters on Microstructure and Properties of 800 MPa Hot Dip Galvanized Dual Phase Steel
工艺参数对800MPa热镀锌双相钢组织性能的影响
13.
Property requirement and production process of hot-dip galvanizing steel wire for bridge cables
桥梁缆索用热镀锌钢丝的性能要求与加工工艺
14.
Research on Microstructure and Mechanical Properties of High Strength Cold-rolled Dual Phase Steel for Hot-dip Galvanization
高强度冷轧热镀锌用双相钢组织及性能研究
15.
Analysis and Improvement of Dross Pick-up in Hot Dip Strip Coating
热镀锌带钢镀层锌渣缺陷形成分析及改进技术
16.
Continual hot-dip zinc-coated steel sheets and strips
GB/T2518-1988连续热镀锌薄钢板和钢带
17.
Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets
GB/T14978-1994连续热浸镀铝锌硅合金镀层钢带和钢板
18.
A Brief Introduction to High Al-Zinc Alloy Hot Dip Galvanizing Technology for Baosteel CR 3~# CGL
宝钢冷轧3号热镀锌机组采用的高铝锌合金热浸镀生产技术简介